KW-Commerce
KW-Commerce MOUNT PRO Triple Monitor Mount 13-27 inch 2 in 1 accessory
Holds three 13 to 27 inch monitors up to 17.6 lbs each with full motion adjustment and dual desk mounting options
- Full motion articulation with 360° rotation, 90° swivel and ±90° tilt
- Fits 13 to 27 inch screens with VESA 75 and 100 patterns
- Supports each monitor from 4.4 to 17.6 lbs securely
- Dual mounting via C-clamp .39 to 3.15 in or grommet up to 1.97 in
- Adjustable arm height of 11.4 in plus integrated cable management
Triple Monitor Mount for 13-27 Inch Screens
The KW-Commerce MOUNT PRO is a new triple monitor arm designed for 13 to 27 inch LCD displays. It supports VESA 75mm x 75mm and 100mm x 100mm patterns and holds each screen at 4.4 to 17.6 lbs. The arm provides 360 rotation, 90 swivel and -90 to +90 tilt with 11.4 inch height adjustment.
Suited for Multi-Screen Workstations.
This mount suits users building a three-screen setup on a single desk edge. It fits desks 0.39 to 3.15 inch thick via C-clamp or up to 1.97 inch thick via grommet. Buyers with screens above 27 inches or heavier than 17.6 lbs each should look at a different solution.
Stable Articulation Under Continuous Adjustment
The gas-spring arms hold position during frequent repositioning without drifting. Integrated cable routing keeps power and video cords organised along the arms. A reinforcement plate is recommended for heavy monitors or thin desktops to distribute clamping pressure and prevent surface damage over time.
Highlights
- Full motion articulation with 360° rotation, 90° swivel and ±90° tilt
- Fits 13 to 27 inch screens with VESA 75 and 100 patterns
- Supports each monitor from 4.4 to 17.6 lbs securely
- Dual mounting via C-clamp .39 to 3.15 in or grommet up to 1.97 in
- Adjustable arm height of 11.4 in plus integrated cable management
Specifications
No published specifications for this item yet.
Questions about this item
Will the MOUNT PRO arm fit monitors that use a VESA 75x75 or 100x100 pattern?
Yes, the mount supports both VESA 75mm x 75mm and 100mm x 100mm mounting patterns on each arm.
Can I install this on a desk without a grommet hole using the C-clamp?
The C-clamp attaches to desk edges from 0.39" to 3.15" thick, so no grommet hole is required.
How do I confirm each arm is balanced after mounting my screens?
Adjust the tension until the monitor stays at any height within the 11.4" range without drifting up or down.
New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
