Kuriyama
Kuriyama Clear PVC Tubing 3/8 in ID 1/2 in OD 100 ft 45 psi Shore A73
Clear PVC tubing carries air or water at 45 psi and 150 °F with Shore A73 hardness
- ColorClear
- Clear PVC resists kinking and lets you see flow inside
- 100 ft continuous length covers long runs without joints
- Shore A73 hardness balances flexibility with shape retention
- Rated 45 psi at 70 °F for reliable low-pressure service
- Withstands temperatures up to 150 °F for hot-water lines
Clear PVC tubing for air and water lines
This 100-foot roll of clear PVC tubing has a 3/8-inch inside diameter and a 1/2-inch outside diameter. It is rated for 45 psi at 70 degrees F and handles temperatures up to 150 degrees F. The Shore A73 hardness gives it a firm but flexible feel. It suits general air and water transfer in plumbing or automotive settings.
Capacity and pressure limits
The 100-foot length provides ample reach for long runs without joins. At 45 psi maximum operating pressure, it covers low-pressure air and water circuits comfortably. It runs out of headroom in higher-pressure hydraulic or compressed-air systems that exceed the 45 psi rating. The Shore A73 hardness resists kinking but limits tight-radius bends compared with softer tubing.
Build quality and daily use
Clear PVC construction lets you inspect flow visually for blockages or air bubbles. The material carries a California Proposition 65 warning for chemicals linked to cancer and reproductive harm. It is not compatible with peristaltic pumps, so roller-pump setups need a different tube. The smooth bore and consistent dimensions help maintain steady flow in fixed installations.
Highlights
- Clear PVC resists kinking and lets you see flow inside
- 100 ft continuous length covers long runs without joints
- Shore A73 hardness balances flexibility with shape retention
- Rated 45 psi at 70 °F for reliable low-pressure service
- Withstands temperatures up to 150 °F for hot-water lines
Specifications
| Color | Clear |
|---|---|
| Brand | ZORO SELECT |
Questions about this item
Will the 3/8 in ID and 1/2 in OD fit my existing 3/8 in barbed fittings?
The tubing has a 3/8 in inside diameter and 1/2 in outside diameter, so standard 3/8 in barbed fittings will slide inside and seal when clamped.
How can I confirm the line is holding the rated 45 psi at 70 Degrees F after installation?
Pressurise the system to 45 psi at 70 Degrees F and watch the gauge; a steady reading with no visible leaks at connections means the tubing is performing to its rating.
Does the 100 ft coil include clamps or fittings, or must I buy them separately?
The package contains only the 100 ft clear PVC tubing; clamps, barbed fittings and any other connectors are sold separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor Made 12" x 18" Jolly Roger Novelty Flag 1818 marine electronic
- Accessories



