We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear PVC tubing coil 100 ft Shore A73

Kuriyama

Kuriyama 4HM01 Clear PVC Tubing 100 ft 35 psi Shore A73

SKU CH-N8VJ-AVCF0

Clear PVC tubing rated 35 psi at 70 °F, 100 ft length, Shore A73 hardness for air and water lines

  • ColorClear
  • Clear visibility for flow checks with transparent PVC construction
  • Handles air and water transfer at 35 psi working pressure
  • Shore A73 hardness resists kinking and abrasion during use
  • 100 ft continuous length reduces joints in long runs
  • Rated to 150 °F for hot-water applications

Clear PVC Tubing for Air and Water Transfer

This clear PVC tubing is designed for general-purpose air and water conveyance in plumbing and automotive applications. It suits installers and maintenance teams needing a flexible, transparent line for visual flow monitoring. The material carries a Shore A73 hardness rating for a balance of pliability and kink resistance. It is not intended for high-pressure hydraulic systems or peristaltic pump setups.

Thermals Noise and Power Draw in Normal Use

The tubing handles a maximum operating pressure of 35 psi at 70 degrees F and a maximum operating temperature of 150 degrees F. As a passive conduit, it generates no operational noise and draws no electrical power. Performance remains consistent within the stated pressure and temperature limits for standard air and water transfer tasks. California Proposition 65 warnings apply regarding chemical content.

Included Accessories and Software Impact

The product ships as a single 100-foot coil without additional fittings, clamps, or cutting tools. No software or digital components are included or required for operation. Users must source compatible connectors separately based on the 5/8 inch inside diameter and 3/4 inch outside diameter. The clear jacket allows immediate visual inspection for blockages or wear.

Highlights

  • Clear visibility for flow checks with transparent PVC construction
  • Handles air and water transfer at 35 psi working pressure
  • Shore A73 hardness resists kinking and abrasion during use
  • 100 ft continuous length reduces joints in long runs
  • Rated to 150 °F for hot-water applications

Specifications

ColorClear
BrandZORO SELECT

Questions about this item

How do I install the 5/8 in inside diameter tubing onto fittings without kinking the 100 ft coil?

Warm the PVC coil to room temperature, cut square with a tubing cutter, then push onto barbed fittings; the 3/4 in outside diameter seats fully when the clear wall sits flush against the fitting shoulder.

What maintenance or replacement will the Shore A73 PVC tubing need after extended water or air service?

Inspect regularly for surface crazing, hardening or discoloration; replace the 100 ft length if the clear wall clouds, the 35 psi rating drops, or the material stiffens beyond Shore A73 feel.

At what point does the 35 psi at 70 °F pressure limit become the first constraint during sustained use?

The 35 psi ceiling is reached before the 150 °F temperature limit in typical air or water lines; exceeding it risks burst failure on the 5/8 in ID clear PVC.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.