We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear flexible tubing coil 100 ft Shore A73

Kuriyama

Kuriyama 4HL97 Tubing 55 psi 70F 100 ft Shore A73

SKU CH-V8DF-GWT7S

Tubing rated for 55 psi at 70°F with Shore A73 hardness in a 100 ft length

  • Rated for 55 psi at 70F operating conditions
  • 100 ft continuous length reduces connection points
  • Shore A73 hardness balances flexibility with durability
  • ZORO SELECT brand identifies the manufacturer
  • New condition ensures full material integrity

Tubing for 55 psi at 70F

This 100 ft length of flexible tubing is rated for 55 psi working pressure at 70F. It suits fluid-transfer tasks in automotive and general plumbing systems. The Shore A73 hardness gives a firm yet pliable wall that resists kinking during installation. Buyers who need a higher pressure rating or a different temperature range should look elsewhere.

Practical limits of the pressure rating

The 55 psi figure applies only at 70F; pressure capacity drops as temperature rises. The 100 ft coil allows long runs without joints, but each connection point must be clamped to hold the rated pressure. Systems that operate above 55 psi or well above 70F cannot use this tubing safely. No fittings or clamps are included in the package.

Shore A73 hardness decides fit

Shore A73 defines the wall stiffness that determines whether the tubing seals on your barbs and resists collapse under vacuum. Softer tubing may leak; harder tubing may crack when bent tight. Verify that your fittings and bend radii match this durometer before ordering. The single 100 ft length cannot be split into shorter factory-cut pieces.

Highlights

  • Rated for 55 psi at 70F operating conditions
  • 100 ft continuous length reduces connection points
  • Shore A73 hardness balances flexibility with durability
  • ZORO SELECT brand identifies the manufacturer
  • New condition ensures full material integrity

Specifications

No published specifications for this item yet.

Questions about this item

Should I choose the 100 ft roll or a shorter length for my drainage project?

The 100 ft roll provides a continuous length of tubing, reducing the number of joints needed in a drain line and allowing long runs to be cut to exact site measurements.

What does the 55 psi at 70F rating mean when the tubing is installed in a real system?

It indicates the maximum working pressure the tubing can handle at 70 degrees Fahrenheit; at higher temperatures the allowable pressure drops, so the system must stay within this limit.

What does the Shore A73 hardness tell me about the tubing's flexibility and sealing ability?

A Shore A73 rating means the material is firm enough to resist kinking and hold its shape under pressure, yet flexible enough to bend around fittings and create a reliable seal.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.