We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Metal adapter with 28mm outer and 16mm inner receiver, silver finish

Kupo

Kupo TV to Motion Picture Adapter 28mm 16mm KG005412

SKU CH-FD4B-GAYPW

A junior 28 mm to baby 16 mm adapter with a top bolt for securing lighting fixtures to stands

  • Junior 28 mm receiver fits industry-standard mounts
  • Baby 16 mm interior pin accepts common accessories
  • Top bolt locks securely to lighting-fixture yokes
  • Set-screw and knob give fast, tool-free attachment
  • Rugged metal build withstands daily production use

Adapter for Junior and Baby Mounts

The Kupo TV to Motion Picture Adapter connects a junior 28 mm outer receiver to a baby 16 mm interior receiver. It lets gaffers and camera operators mount PAR cans, lighting fixtures or accessories onto light stands or rigging that use the smaller baby pin standard. The adapter suits both professional crews and independent filmmakers who need a secure bridge between the two common sizes.

Thermal and Power Behaviour

As a passive metal adapter it generates no heat, draws no power and produces no audible noise during use. There are no electronic components, fans or moving parts that could overheat or fail under continuous operation on set. Performance remains consistent regardless of how long the fixture stays powered.

Build Quality and Daily Use

A set-screw with a knob clamps the baby pin firmly while a top bolt locks the adapter into a junior receiver or yoke. The all-metal construction resists deformation when supporting heavy PAR cans or modifiers. The dual locking points prevent accidental rotation or slippage during repositioning, reducing setup time between shots.

Highlights

  • Junior 28 mm receiver fits industry-standard mounts
  • Baby 16 mm interior pin accepts common accessories
  • Top bolt locks securely to lighting-fixture yokes
  • Set-screw and knob give fast, tool-free attachment
  • Rugged metal build withstands daily production use

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the Kupo TVMP adapter onto a junior receiver and secure a fixture to the yoke?

Slide the 28mm outer diameter into the junior receiver, tighten the set-screw knob on the baby pin, then drive the top bolt through the fixture yoke to lock it in place.

What hardware on the Kupo KG005412 will need checking or replacement after repeated rigging cycles?

Inspect the set-screw knob threads and the top mounting bolt for wear or corrosion; replace either piece if the threads no longer hold firm.

What is the first limitation you hit when the Kupo TVMP adapter is under constant load from a mounted fixture?

The 16mm baby receiver bore and the 28mm junior spigot define the maximum pin sizes the adapter can accept, so heavier fixtures requiring larger pins cannot be mounted.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.