KRAFT TOOL
KRAFT TOOL SK214 Power Troweler Blade Finish 6x18 in
Carbon-steel finish blade, 6 by 18 inches, for power trowel concrete smoothing
- TypeMasonry Tools
- Finish-ready surface from carbon steel durability
- 18 in length covers wide passes efficiently
- 6 in width fits standard trowel machines
- Single blade replaces worn edges directly
- Model SK214 ensures correct equipment match
Replacement blade for power trowels
The KRAFT TOOL SK214 is a finish blade built for power trowels used in concrete surfacing. It suits contractors and crews who need to swap worn blades on existing equipment. The single-piece carbon steel body is made for repeated finish passes on fresh slabs. This item is sold individually and is not a kit or multi-pack.
Durable carbon steel construction
The blade uses carbon steel that resists wear during normal finishing work. No moving parts, bearings or motors are present, so there are no thermal, noise or power-draw characteristics to report. Performance depends entirely on the trowel machine driving the blade. Regular inspection for edge wear keeps results consistent.
Fits standard 6 by 18 inch mount
The blade measures 6 in wide by 18 in long and mounts to compatible trowel arms without modification. It frees the operator from machining custom blanks or adapting undersized stock. Ensure the host machine accepts this bolt pattern before purchase. No additional hardware is included in the package.
Highlights
- Finish-ready surface from carbon steel durability
- 18 in length covers wide passes efficiently
- 6 in width fits standard trowel machines
- Single blade replaces worn edges directly
- Model SK214 ensures correct equipment match
Specifications
| Brand | Kraft Tool |
|---|---|
| Model | SK214 |
| Type | Masonry Tools |
Questions about this item
How do I install the 6 x 18 in finish blade on my power troweler?
Remove the old blade, align the new blade's mounting holes with the trowel arms, insert the bolts and tighten evenly; the step most often missed is checking that the blade sits flat before final torque.
What maintenance will the carbon steel finish blade need over time?
Clean concrete residue after each use, dry thoroughly and apply a light oil coat to prevent rust; resurface or replace once the leading edge wears thin enough to leave drag marks.
At what point does the 18 in blade show its limit during a long finishing run?
The carbon steel edge dulls first — when it stops burning the surface cleanly and starts tearing the cream, the blade has reached its practical wear limit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
