Komelon
Komelon 535C 35 ft 1 in tape measure
A 35 ft yellow blade with 1/16 in graduations, automatic rewind, manual lock, and a corrosion-resistant chrome-plated case
- TypeMeasuring & Layout Tools
- 35 ft reach for long-run layouts
- 1 in wide blade stays rigid across spans
- 1/16 in graduations for fine readings
- Automatic rewind retracts tape without effort
- Chrome-plated case resists corrosion on site
35 ft tape measure for long-distance layout
The Komelon 535C extends a yellow blade up to 35 ft for measuring long runs on site. Graduations are marked in 1/16 in increments using SAE units. A chrome-plated case protects the blade from corrosion during daily use. The manual lock secures the blade at any point while you mark or record a dimension.
Automatic rewind with manual lock control
An automatic rewind system pulls the blade back into the case without requiring force from the user. The manual lock holds the blade firmly at the chosen measurement so it will not creep during layout work. Chrome plating on the case resists rust in damp or outdoor conditions. These features keep the tool operating smoothly through repeated extend and retract cycles.
1 in wide blade with 1/16 in graduations
The blade width is 1 in, providing a broad, readable scale for long-distance work. Graduations are spaced at 1/16 in, giving the resolution needed for precise carpentry and layout tasks. SAE measurement type matches imperial plans and building codes. This combination of width and graduation spacing determines whether the tape suits your measuring requirements.
Highlights
- 35 ft reach for long-run layouts
- 1 in wide blade stays rigid across spans
- 1/16 in graduations for fine readings
- Automatic rewind retracts tape without effort
- Chrome-plated case resists corrosion on site
Specifications
| Brand | Komelon |
|---|---|
| Type | Measuring & Layout Tools |
Questions about this item
How do I lock the blade at a specific measurement on the Komelon 535C?
Slide the manual lock button forward to engage the internal pawl against the blade; the step users miss is releasing the lock before letting the blade rewind, otherwise the spring can kink the first 16 inches.
What part of the Komelon 535C will wear out first with daily use?
The yellow blade coating and printed 1/16" graduations abrade before the chrome-plated case or the automatic rewind spring, so plan to replace the tape when markings become hard to read.
At what length does the 35 ft blade start to sag noticeably when extended horizontally?
Beyond roughly 16 ft the 1-inch wide blade bows under its own weight, so for solo work keep spans shorter or support the tape at the midpoint.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
