Knipex
Knipex 97 71 180 7 1/4 in Crimper 23 to 5 AWG electrician tool
Crimps 23 to 5 AWG wire with nine deep troughs and conical side faces that hold round dies securely
- Adjustable 23 to 5 AWG capacity covers a wide wire range
- Nine deep troughs with conical faces grip round dies securely
- Polished head resists corrosion and wear over time
- Plastic-coated handles protect against corrosion and improve durability
- Compact 7 1/4 inch length fits easily in tool bags
Precision Crimper for Electrical Wire
The Knipex 97 71 180 is a 7 1/4 in crimper built for electrical wire and cable work. Its adjustable capacity covers 23 to 5 AWG, so one tool handles a wide range of conductor sizes. The polished head and plastic-coated handles resist corrosion while giving a secure grip. It suits electricians and technicians who need repeatable, reliable terminations on site or in the workshop.
Nine Deep Troughs with Conical Side Faces
The head carries nine deep troughs shaped with conical side faces that hold round dies securely during each crimp. This geometry keeps the die aligned with the conductor, reducing the chance of a skewed or loose connection. The polished finish helps the tool release cleanly after compression. No separate die sets or software are included; the crimper arrives ready to use on the stated AWG range.
Simple Hand-Tool Setup
No power source, calibration or mounting is required — open the handles, position the wire and die, then squeeze. The plastic-coated handles stay comfortable during repeated cycles, but users must verify the correct trough for the wire gauge before crimping. A common error is selecting the wrong AWG slot, which produces an undersized or oversized joint. Inspect each crimp visually and with a pull test to confirm mechanical integrity.
Highlights
- Adjustable 23 to 5 AWG capacity covers a wide wire range
- Nine deep troughs with conical faces grip round dies securely
- Polished head resists corrosion and wear over time
- Plastic-coated handles protect against corrosion and improve durability
- Compact 7 1/4 inch length fits easily in tool bags
Specifications
| Brand | Knipex |
|---|---|
| Model | 97 71 180 |
Questions about this item
Will the 9 deep troughs with conical side faces on the 97 71 180 need periodic replacement?
The 9 deep troughs are integral to the forged head and are not designed as replaceable inserts; normal maintenance is limited to keeping the polished head clean and lightly oiled to prevent corrosion.
What is the first limit reached when crimping continuously at the upper end of the 23 to 5 AWG range?
Hand force required to fully close the handles on 5 AWG conductors becomes the practical limit long before the tool mechanism shows wear.
Does the plastic-coated handle stay cool and comfortable during all-day electrical work?
The plastic coating insulates against conducted heat from the polished head and reduces grip fatigue, so the handles remain comfortable during extended use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
