Knipex
Knipex 97 62 145 A crimper 5 3/4 in 23-13 AWG
Crimps insulated and non-insulated ferrules from 23 to 14 AWG with a trapezoid profile in a 5 3/4 in steel frame
- Covers 23 to 13 AWG wire range
- Trapezoid crimp profile for insulated and non-insulated ferrules
- 5 3/4 in steel body with manual adjustability
- Deluxe cushion grip reduces hand fatigue
- No wire cutter or stripper included
Knipex 97 62 145 A crimper for electricians
This Knipex crimper handles insulated and non-insulated single ferrules with a trapezoid crimp profile. It accepts wire sizes from 24 AWG up to 14 AWG, covering the 23 to 13 AWG range. The 5 3/4 in steel body features deluxe cushion grips for comfort during repetitive wiring tasks. It is built for professional electricians and panel builders who need reliable ferrule terminations.
Upgrading from basic strippers or pliers
Moving up from generic crimpers or improvised tools eliminates loose ferrules and damaged conductors. The dedicated trapezoid profile ensures a gas-tight connection that meets professional standards. The jump is worth it when panel density increases and rework time must be minimised. Users who only crimp occasionally may not need this precision.
Simple manual operation with one common pitfall
The tool uses manual adjustability, so the operator selects the correct die position for each wire size. No wire cutter or stripper is integrated, so those steps require separate tools. The most frequent error is mismatching the ferrule size to the die, which produces a weak crimp. Always verify the AWG marking on the ferrule before squeezing.
Highlights
- Covers 23 to 13 AWG wire range
- Trapezoid crimp profile for insulated and non-insulated ferrules
- 5 3/4 in steel body with manual adjustability
- Deluxe cushion grip reduces hand fatigue
- No wire cutter or stripper included
Specifications
| Brand | Knipex |
|---|---|
| Model | 97 62 145 A |
Questions about this item
What wire gauges does the 97 62 145 A crimper accept for trapezoid crimps?
It crimps insulated and non-insulated single ferrules from 24 AWG up to 14 AWG, covering 24, 22, 20, 18, 16 and 14 AWG sizes.
How do I position the ferrule in the jaws to avoid a bad crimp?
Insert the ferrule fully into the trapezoid profile so the conductor seats against the stop, then squeeze the handles completely until the ratchet releases.
When should I replace the 97 62 145 A or have it recalibrated?
Replace it if the cushion grips split, the pivot develops play, or the ratchet fails to hold and release cleanly after repeated cycles.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
