Knipex
Knipex 97-52-04 Crimping Plier AWG 27-13
Crimps non-insulated open-plug terminals from AWG 27 to 13 using lever transmission for reduced effort
- TypeAdjustable Wrenches
- Crimps open plug connectors 2.8 and 4.8 mm wide
- Handles uninsulated terminals from AWG 27 to 13
- Lever transmission multiplies hand force for easier crimping
- Steel body with plastic grips resists wear in daily use
- Manual adjustability lets you match the connector size precisely
Precision crimping for open plug terminals
The Knipex 97-52-04 crimping plier handles non-insulated open plug connectors with 2.8 mm and 4.8 mm widths. Lever transmission reduces the effort needed for each crimp across a 27 to 13 AWG wire range. It is built for technicians who need repeatable connections on automotive or industrial harnesses.
Replaces manual crimpers without leverage
Older hand crimpers require high grip force and often produce inconsistent results on smaller gauges such as 26 AWG or 24 AWG. The lever mechanism gives a mechanical advantage that makes the step up worthwhile when you crimp dozens of terminals per shift. It does not suit users who only work with insulated terminals or closed-barrel contacts.
Fits in a standard tool pouch
The 9 7/8 in steel body with plastic grips sits alongside wire cutters and strippers without needing a dedicated case. No integrated cutter or stripper means you keep your preferred separate tools for those tasks. Adjustability is manual so you select the die position for each wire size before crimping.
Highlights
- Crimps open plug connectors 2.8 and 4.8 mm wide
- Handles uninsulated terminals from AWG 27 to 13
- Lever transmission multiplies hand force for easier crimping
- Steel body with plastic grips resists wear in daily use
- Manual adjustability lets you match the connector size precisely
Specifications
| Type | Adjustable Wrenches |
|---|
Questions about this item
Will the 2.8 mm and 4.8 mm open plug terminals fit in the jaws of the 97-52-04?
Yes, the tool is designed for non-insulated open plug connectors with widths of 2.8 mm and 4.8 mm.
How do I adjust the crimp depth on the 97-52-04 and what is the common mistake?
Turn the adjustment dial to match the wire gauge; the common error is leaving it on the wrong AWG setting for the wire being used.
Which parts of the 97-52-04 wear out and need replacement over time?
The hardened steel crimping dies and the pivot joint are the main wear items; the plastic grips may also degrade with heavy use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
