Knipex
Knipex 97 51 10 7 1/2 in Crimper RJ-11/12 6-Poles 9.65mm RJ-45 8-Poles
Crimps RJ-45 8-pole and RJ-11/12 6-pole connectors with integrated wire cutter and stripper
- Crimps RJ-45 8-pole and RJ-11/12 6-pole connectors
- 65 mm and 11.68 mm crimping capacities cover both standards
- Built-in wire cutter and stripper speed up cable prep
- 7 1/2 in steel body with cushioned grip for comfort
- Manual adjustability gives full control over every crimp
Knipex 97 51 10 Crimping Pliers
This Knipex 97 51 10 crimping tool handles RJ-11/12 six-pole and RJ-45 eight-pole connectors with crimp capacities of 9.65 mm and 11.68 mm respectively. The 7 1/2 in steel body includes integrated wire cutter and stripper functions. Deluxe cushion grips provide manual adjustability for professional telecommunications and data cabling work.
Telephone and network cable installers
Suits technicians terminating Western plug connectors on telephone and network cables who need a single tool for both 6-pole and 8-pole positions. Not suited for users requiring insulated handles, interchangeable die sets, or crimping capacity beyond the stated 9.65 mm and 11.68 mm specifications. Builders needing coaxial or fibre termination should look elsewhere.
Ready to use from the box
No assembly or die installation is required because the crimping profiles are fixed into the jaws. The manual adjustability lets operators set pressure by feel. Common issues include misaligned conductor insertion before crimping and applying excessive force that can damage the connector housing or tool pivot.
Highlights
- Crimps RJ-45 8-pole and RJ-11/12 6-pole connectors
- 65 mm and 11.68 mm crimping capacities cover both standards
- Built-in wire cutter and stripper speed up cable prep
- 7 1/2 in steel body with cushioned grip for comfort
- Manual adjustability gives full control over every crimp
Specifications
| Brand | Knipex |
|---|---|
| Model | 97 51 10 |
Questions about this item
What connectors do I need to have on hand for the Knipex 97 51 10 to crimp?
The tool crimps RJ-11/12 6-pole plugs at 9.65 mm and RJ-45 8-pole plugs at 11.68 mm, so keep those connector types in stock.
Can I still use the Knipex 97 51 10 if I keep my older telephone cable?
Yes, the crimper is compatible with telephone cable and the same RJ-11/12 and RJ-45 Western plugs used on legacy installations.
How do I verify the Knipex 97 51 10 is crimping correctly after setup?
A proper crimp seats the plug fully in the 9.65 mm or 11.68 mm die, locks all contacts flush, and the built-in cutter and stripper leave clean ends without insulation damage.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
