We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel braided faucet supply line with brass compression fittings 36in length

KISSLER AND CO., INC.

KISSLER AND CO., INC. Faucet Supply Line 3/8x1/2 36in 88-2036

SKU CH-WB5K-JDTR8

A 36-inch faucet supply line connects 3/8-inch compression to 1/2-inch FIP brass fittings with a stainless-steel covered PVC hose rated to 250 psi at 70 °F and a 40 to 180 °F temperature range

  • MaterialMetal
  • 36-inch length reaches distant supply valves easily
  • 250 psi working pressure handles high-demand fixtures safely
  • Brass compression and FIP fittings ensure leak-free connections
  • Stainless-steel braided cover resists corrosion and kinking
  • Certified to IAPMO and NSF standards for potable water use

36-inch faucet supply line

This 36-inch faucet supply line connects lavatory and kitchen faucets using a 3/8-inch compression fitting on one end and a 1/2-inch FIP fitting on the other. The hose has a 5/16-inch inside diameter with a PVC tube covered in stainless steel. Both brass fittings are included for a secure installation.

Suits standard faucet connections

It suits installers who need a flexible connector rated for 250 psi at 70 degrees Fahrenheit and a temperature range of 40 to 180 degrees Fahrenheit. Buyers who require a different fitting type, a longer or shorter length, or a hose material not listed here should look at other options.

Handles sustained pressure and temperature

The stainless steel cover protects the PVC tube during continuous use at the rated working pressure. Brass fittings resist corrosion through repeated thermal cycles across the stated temperature range. The assembly meets IAPMO and NSF standards for plumbing applications.

Highlights

  • 36-inch length reaches distant supply valves easily
  • 250 psi working pressure handles high-demand fixtures safely
  • Brass compression and FIP fittings ensure leak-free connections
  • Stainless-steel braided cover resists corrosion and kinking
  • Certified to IAPMO and NSF standards for potable water use

Specifications

MaterialMetal
BrandKISSLER & CO

Questions about this item

What fittings must my faucet and shut-off valve have for this 3/8 in compression by 1/2 in FIP supply line to connect?

Your faucet needs a 3/8 in compression thread and the shut-off valve a 1/2 in FIP thread; both fittings on this hose are brass.

Will the PVC inner hose and stainless-steel cover handle the hot-water side of a lavatory or kitchen faucet?

Yes, the line is rated 40 to 180 degrees F at up to 250 psi at 70 degrees F, covering normal hot-water supply temperatures.

How can I confirm the line is sealed and flowing correctly after I tighten the compression and FIP nuts?

Turn on the water and check the 36 in hose and both brass fittings for drips; steady flow with no leaks means the installation is sound.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.