KingSener
KingSener SB-170P Li-ion Battery 10.8V 2900mAh 31.3Wh for Nihon Kohden BSM-1700 X161
Replacement lithium-ion battery delivering 10.8V and 2900mAh for Nihon Kohden BSM-1700 and X161 medical monitors
- Battery Voltage10.8V
- Battery Capacity2900mAh / 31.3Wh
- Reliable power for critical medical equipment
- 8V 2900mAh 31.3Wh lithium-ion capacity
- Direct replacement for Nihon Kohden BSM-1700 X161
- Brand-new cells with verified full design capacity
- Medical-grade quality cells and PCB construction
Replacement Battery for BSM-1700 and X161
The KingSener SB-170P is a lithium-ion power cell built for Nihon Kohden Lifescope PT patient monitors. It matches the original form factor so technicians can swap it without tools or adapter changes. The 10.8V output and 2900mAh rating meet the electrical requirements of the specified medical devices.
Sustained Output in Clinical Use
High-quality cells and a tested PCB deliver stable voltage through a full discharge cycle rather than a brief peak. The supplier confirms the real capacity is not less than the rated 31.3Wh, supporting extended monitoring sessions. Following the recommended initial charge cycles helps the pack reach its full run-time potential.
Voltage and Capacity Match
The 10.8V and 2900mAh figures are the critical specifications that determine compatibility with the host monitor. A different voltage or lower capacity would prevent correct operation or shorten shift coverage. Buyers who need a higher energy reserve or a different cell chemistry should look elsewhere.
Highlights
- Reliable power for critical medical equipment
- 8V 2900mAh 31.3Wh lithium-ion capacity
- Direct replacement for Nihon Kohden BSM-1700 X161
- Brand-new cells with verified full design capacity
- Medical-grade quality cells and PCB construction
Specifications
| Model | SB-170P |
|---|---|
| Part Number | SB-170P |
| Battery Voltage | 10.8V |
| Battery Capacity | 2900mAh / 31.3Wh |
Questions about this item
Does the 10.8V 2900mAh battery generate noticeable heat during continuous use in a BSM-1700 monitor?
The Li-ion cells are designed for stable capacity and longer running time; follow the tip to avoid connecting the adapter for long periods while on battery power to prevent damage.
What must I already own to install this SB-170P replacement in my Nihon Kohden Lifescope PT?
You need the original BSM-1700 or X161 monitor; the battery matches the original size so no extra adapters or tools are required for the swap.
Will this 31.3Wh pack work reliably alongside the older charging circuitry in a BSM-1700 unit?
The battery is 100% compatible with the original device; the supplier recommends a full charge and discharge cycle two or three times at low current to condition the cells.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



