KingSener
KingSener PKWVM / C903V / CR72X / 68ND3 11.1V 48Wh laptop battery
Replacement 11.1V 48Wh Li-ion battery for Dell Latitude and Precision laptops with overcharge and short circuit protection
- Battery Voltage11.1V
- Battery Capacity48Wh / 4400mAh
- Longer run time with 48Wh capacity
- Reliable power at 11.1V voltage
- Extended use from 4400mAh rating
- Fits Dell Latitude E6420, E6520, E5420, E5520
- Protected against overcharge and short circuit
Replacement battery for Dell Latitude and Precision
This 11.1V 48Wh lithium-ion pack replaces Dell part numbers PKWVM, C903V, CR72X and 68ND3. It fits Latitude E6420, E6520, E5420 and E5520 models as well as Precision M2800 systems. The unit is brand new and has been tested to full capacity.
Suits owners restoring runtime on listed Dell
Buyers needing a battery for other Dell series or for non-Dell laptops should look elsewhere. The pack is designed only for the specific part numbers and models shown above. Users wanting a higher-capacity cell or a different voltage must choose another product.
Verify your Dell part number before ordering
Confirm that the original battery carries one of the four part numbers printed on its label. Check that your laptop model appears in the supported list. Ensure the voltage rating matches 11.1V and the connector layout is identical to the original unit.
Highlights
- Longer run time with 48Wh capacity
- Reliable power at 11.1V voltage
- Extended use from 4400mAh rating
- Fits Dell Latitude E6420, E6520, E5420, E5520
- Protected against overcharge and short circuit
Specifications
| Brand | LUSONBAY |
|---|---|
| Model | PKWVM |
| Part Number | PKWVM / C903V / CR72X / 68ND3 |
| Battery Voltage | 11.1V |
| Battery Capacity | 48Wh / 4400mAh |
Questions about this item
Which Dell laptop models accept the PKWVM 11.1V 48Wh battery?
The battery fits Dell Latitude E6420, E6520, E5420, E5520 and Precision M2800 models that use part numbers PKWVM, C903V, CR72X or 68ND3.
Will the 4400mAh capacity work with my existing 11.1V Dell charger?
Yes, the 11.1V voltage matches the original specification so your current Dell AC adapter will charge the 48Wh pack normally.
How can I verify the battery is recognised after installation?
The system BIOS should show the correct 11.1V 48Wh capacity and the battery icon will display charge percentage without error warnings.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



