KingSener
KingSener LI12I003A laptop battery 7.56V 2600mAh 18.9Wh
Replacement lithium-ion battery rated 7.56V and 2600mAh for compatible Mindray BeneVision N1 devices
- Battery Voltage7.56V
- Battery Capacity2600mAh/18.9Wh
- Compatible with Mindray BeneVision N1 medical devices
- 56V 2600mAh 18.9Wh lithium-ion power for extended runtime
- 100% brand-new cells with verified full design capacity
- Direct replacement matching original 022.000338-00 and 115-049427-00 part numbers
- Same physical dimensions ensure tool-free installation and secure fit
Compatible replacement battery
The KingSener LI12I003A is a 7.56V 2600mAh lithium-ion pack built for Mindray BeneVision N1 medical monitors. It matches part numbers 022.000338-00 and 115-049427-00 so technicians can swap the original without modification. The 18.9Wh capacity restores factory runtime for mobile clinical carts.
Thermal and power behaviour
Li-ion chemistry delivers stable voltage under load while the internal PCB regulates current to protect cells. Normal operation stays within safe temperature limits without active cooling. The pack draws only the current the monitor requests, adding no extra heat to the chassis.
Conditioning guidance included
The supplier ships a short guide that recommends three full charge and discharge cycles at low current to reach rated capacity. It also advises storing the pack above 80 percent charge if removed for more than a month and warns against leaving the AC adapter connected continuously during use.
Highlights
- Compatible with Mindray BeneVision N1 medical devices
- 56V 2600mAh 18.9Wh lithium-ion power for extended runtime
- 100% brand-new cells with verified full design capacity
- Direct replacement matching original 022.000338-00 and 115-049427-00 part numbers
- Same physical dimensions ensure tool-free installation and secure fit
Specifications
| Brand | KingSener |
|---|---|
| Model | LI12I003A |
| Part Number | LI12I003A 022.000338-00 115-049427-00 |
| Battery Voltage | 7.56V |
| Battery Capacity | 2600mAh/18.9Wh |
Questions about this item
How do I install the LI12I003A battery in my Mindray BeneVision N1 and what step do people often miss?
Power off the device, remove the old pack, align the connector and press the new battery until it clicks; the step most skip is the initial conditioning — fully charge and discharge at low current two or three times before regular use.
What maintenance will the LI12I003A need later and when should I replace it?
Store above 80 % charge if unused for a month, avoid heat and humidity, and do not leave the AC adapter connected continuously; replace the pack when runtime drops well below the 18.9 Wh design capacity.
What limit appears first during sustained use of the LI12I003A?
The 2600 mAh capacity sets the runtime ceiling; under continuous load the pack will reach its 7.56 V cut-off and require recharge before the thermal or cycle-life limits become a factor.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



