KingSener
KingSener BTE-002 laptop battery 14.8V 4600mAh for Fukuda FX-8322 FX-8322R FCP-8321 FCP-8453
Replacement 14.8 V, 4600 mAh lithium-ion battery compatible with Fukuda FX-8322, FX-8322R, FCP-8321 and FCP-8453 models
- Battery Voltage14.8V
- Battery Capacity4600 mAh
- 8 V output matches original spec for stable power
- 4600 mAh capacity extends runtime between charges
- Li-ion chemistry gives reliable cycle life
- Direct replacement for Fukuda BTE-002 FX-8322 FX-8322R FCP-8321 FCP-8453
- Brand-new cell pack backed by one-year coverage
Replacement battery for Fukuda models
This replacement battery is built for Fukuda laptops including the FX-8322, FX-8322R, FCP-8321 and FCP-8453 series. It matches the original BTE-002 part number and restores mobile power when the factory pack no longer holds charge.
Suits owners of listed Fukuda notebooks
The pack fits only the four model families named above; it will not work in other Fukuda lines or in laptops from different brands. Buyers who need a battery for a different part number or a higher capacity should look at another option.
14.8 V 4600 mAh lithium-ion pack
The unit delivers 14.8 volts and 4600 milliampere-hours using lithium-ion cells. This voltage and capacity combination determines whether the battery will physically fit and meet the runtime expectations of the compatible models.
Highlights
- 8 V output matches original spec for stable power
- 4600 mAh capacity extends runtime between charges
- Li-ion chemistry gives reliable cycle life
- Direct replacement for Fukuda BTE-002 FX-8322 FX-8322R FCP-8321 FCP-8453
- Brand-new cell pack backed by one-year coverage
Specifications
| Brand | KingSener |
|---|---|
| Model | BTE-002 |
| Part Number | BTE-002 FX-8322 FX-8322R FCP-8321 FCP-8453 |
| Battery Voltage | 14.8V |
| Battery Capacity | 4600 mAh |
Questions about this item
Will the BTE-002 fit my Fukuda FX-8322 without any case modifications?
Yes, the BTE-002 is built to the original chassis dimensions for the FX-8322, FX-8322R, FCP-8321 and FCP-8453, so it slides into the existing battery bay with no trimming or adapters required.
What is the correct order to connect the BTE-002 and avoid a loose contact?
Power off the laptop, unplug the AC adapter, remove the old pack, align the BTE-002 connector with the motherboard header, press firmly until it clicks, then refit the battery latch before turning the machine on.
When should I expect to replace the 4600 mAh pack in my FCP-8453?
A lithium-ion cell degrades with each full charge cycle; after roughly two to three years of daily use the run-time will fall well below the original 4600 mAh rating, signalling it is time for a new pack.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



