KingSener
KingSener A1713 laptop battery 11.4V 54.5Wh for MacBook Pro 13.3 A1708 2016 2017
Replacement lithium-ion battery delivers 11.4 V and 54.5 Wh capacity for MacBook Pro 13.3 models A1708 from 2016 and 2017
- ColorBlack
- TypeBattery
- Compatibility54.5Whr/4781mAh
- Battery TypeLithium-Ion
- Battery Voltage11.4V
- Battery Capacity4781mAh
- 5 Wh capacity extends unplugged runtime
- 4 V lithium-ion chemistry matches original spec
- 4781 mAh rating supports full-day workloads
- Direct replacement for Apple part 020-00946
- Fits MacBook Pro 13.3 A1708 Late 2016 Mid 2017
What this battery replaces
The KingSener A1713 is a lithium-ion replacement battery rated at 11.4 V and 54.5 Wh. It matches the original Apple part numbers A1713 and 020-00946 for the 13.3 inch MacBook Pro A1708 models released in late 2016 and mid 2017.
Who this suits and who it does not
Owners of the listed A1708 Retina models with Core i5 2.0, 2.3 or Core i7 2.4, 2.5 GHz processors can use this pack. Buyers with any other MacBook Pro size, year or model number should look elsewhere because the connector and form factor differ.
Installation notes
Replacing the battery requires removing the bottom case and disconnecting the trackpad flex cable before unscrewing the battery. The most common issue is damaging the delicate trackpad ribbon or stripping the tri-wing screws if the correct driver is not used.
Highlights
- 5 Wh capacity extends unplugged runtime
- 4 V lithium-ion chemistry matches original spec
- 4781 mAh rating supports full-day workloads
- Direct replacement for Apple part 020-00946
- Fits MacBook Pro 13.3 A1708 Late 2016 Mid 2017
Specifications
| Brand | Kingsener |
|---|---|
| Model | A1713 |
| Part Number | A1713 |
| Color | Black |
| Type | Battery |
| Compatibility | 54.5Whr/4781mAh |
| Battery Type | Lithium-Ion |
| Battery Voltage | 11.4V |
| Battery Capacity | 4781mAh |
Questions about this item
Do I need a specific screwdriver to install the KingSener A1713 battery in my MacBook Pro A1708?
Yes, the MacBook Pro 13.3 A1708 uses proprietary pentalobe screws on the bottom case and tri-wing or Phillips screws on the battery itself; you will need those drivers before starting.
Will the 11.4V 54.5Wh KingSener A1713 work correctly with the original 2016 or 2017 logic board and charging circuit?
The replacement matches the original 11.4V voltage and 54.5Wh capacity, so the MacBook Pro A1708 Late 2016 and Mid 2017 charging system will recognise and manage it normally.
How can I confirm the new A1713 battery is reporting the correct 4781mAh capacity in macOS after installation?
Open System Information → Power and check that Full Charge Capacity reads near 4781 mAh and Cycle Count starts at zero; this confirms the KingSener cell is communicating properly with the SMC.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



