Kinedyne
Kinedyne Cargo Strap Gold 30 ft 16200 lb 553021GRA
A 30 ft polyester cargo strap with a 16,200 lb breaking strength and 5,400 lb working load limit, featuring a gold finish and steel flat hooks for flatbed tie-downs
- 30 ft length secures large flat-bed loads
- 16,200 lb breaking strength handles heavy cargo
- 5,400 lb working load limit for safe tie-down
- Gold polyester webbing resists abrasion and UV
- Steel flat hooks anchor firmly to flat beds
Gold Cargo Strap for Flat-Bed Use
The Kinedyne 553021GRA is a 30 ft polyester tie-down built for securing loads on flat-bed trailers. Its flat-hook ends connect directly to standard stake pockets or rub rails. A 5,400 lb working load limit and 16,200 lb breaking strength suit heavy equipment transport. The gold finish adds visibility during low-light inspections.
Ratchet Tension Holds Under Vibration
The integrated ratchet mechanism lets operators apply and lock tension without slippage during transit. Polyester webbing resists elongation better than nylon, so preload stays consistent over long hauls. Steel end fittings maintain clamping force when the load shifts under braking or cornering. The 6-month manufacturer warranty covers defects in materials and workmanship.
Steel Flat Hooks Fit Common Anchor Points
Flat-hook terminations slide into stake pockets, rub-rail slots or chain anchors without extra hardware. Three-inch-wide webbing distributes pressure across a broader surface to protect cargo edges. Gold-coloured polyester improves spotting during pre-trip walk-arounds and post-delivery checks. Designed to WSTDA standards for tie-down assemblies.
Highlights
- 30 ft length secures large flat-bed loads
- 16,200 lb breaking strength handles heavy cargo
- 5,400 lb working load limit for safe tie-down
- Gold polyester webbing resists abrasion and UV
- Steel flat hooks anchor firmly to flat beds
Specifications
| Brand | KINEDYNE |
|---|
Questions about this item
How much heat or noise does the 3 in wide polyester strap generate during all-day use?
The strap is a passive polyester webbing with a steel ratchet and flat hooks, so it produces no heat and no audible noise while under tension.
What anchor points must already exist on the flatbed for the 16,200 lb flat hooks to engage?
The flat hooks require compatible flatbed stake pockets or rub-rail slots that accept a standard 3 in flat-hook profile.
Will the 30 ft gold strap work with older winches or ratchets that use a different webbing width?
It is built for 3 in wide webbing; older hardware sized for 2 in or 4 in straps will not mesh correctly with the ratchet or the flat hooks.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
