Kinedyne
Kinedyne 592736GRA Gold Cargo Strap 27 ft 20000 lb
Gold polyester tie-down strap with a ratchet adjuster, J-hook ends and a 20,000 lb breaking strength for flat-bed loads
- Gold polyester webbing resists UV and abrasion
- 27 ft length spans wide flat-bed loads
- J-hook zinc-steel ends anchor securely to tie-down points
- 6,670 lb working load limit for heavy cargo
- 20,000 lb breaking strength provides high safety margin
Gold Cargo Strap for Heavy Flatbed Loads
This Kinedyne tie-down strap is built for securing heavy cargo on flatbed trailers and trucks. It uses a 27 ft polyester webbing rated at a 6 670 lb working load limit and a 20 000 lb breaking strength. The gold colour aids visibility while the ratchet mechanism allows precise tension adjustment. Zinc and steel J-hooks provide a secure anchor point for demanding transport jobs.
For Flatbed Operators Needing High Strength
This strap suits professional drivers and fleet operators who move heavy machinery, building materials or oversized loads on flatbeds. The 20 000 lb breaking strength matches severe duty requirements. It is not suited for lighter duty lashing where a lower capacity strap would be easier to handle or for applications requiring different end fittings such as chain anchors or winch fittings.
20 000 lb Breaking Strength Decides Fit
The single specification that determines whether this is the right part is the 20 000 lb breaking strength combined with the 6 670 lb working load limit. If your load securement plan calls for a higher or lower rated assembly this strap will not meet the requirement. Always verify the working load limit against your specific cargo weight and regulatory standards before use.
Highlights
- Gold polyester webbing resists UV and abrasion
- 27 ft length spans wide flat-bed loads
- J-hook zinc-steel ends anchor securely to tie-down points
- 6,670 lb working load limit for heavy cargo
- 20,000 lb breaking strength provides high safety margin
Specifications
| Brand | KINEDYNE |
|---|
Questions about this item
Should I choose the 27 ft length for my flat-bed loads?
The 27 ft strap suits most flat-bed tie-downs; measure your longest run and allow extra for the ratchet and J-hooks.
What does the 20,000 lb breaking strength mean when I am securing a load?
Breaking strength is the laboratory limit; the safe working load limit is 6,670 lb, so plan loads below that figure.
Does the WSTDA standard limit how I can use this strap?
WSTDA sets the testing method; the 6,670 lb working load limit is the practical cap for everyday securing.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
