We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray sealant in a 4 oz plastic pail

Killark

Killark SC-4OZ Sealant 4 oz Pail Gray

SKU CH-SA36-WFXZ3

Gray sealing compound in a 4 oz pail prevents explosive-gas migration in conduit systems from -40 to 65 °F and meets UL 886 and CSA 22.2 No. 20

  • Seals conduit against explosive gas spread
  • Withstands -40 to 65 degrees Fahrenheit
  • Meets CSA 22.2 No. 20 and UL 886 standards
  • Gray sealing compound in 4 oz pail
  • Designed for IMC and RMC applications

Sealing compound for hazardous locations

This gray sealing compound is supplied in a four-ounce plastic pail and is formulated for use with intermediate metal conduit and rigid metal conduit. It prevents the spread of explosive gases through conduit systems in classified areas. The product carries CSA 22.2 No. 20 and UL 886 listings for hazardous-location installations.

Replaces field-mixed putty and unlisted mastics

Electricians can switch to this pre-measured, listed compound when a job requires a verified seal that meets the cited standards. The jump is worth it on projects where inspectors demand documented compliance and where a ready-to-use pail saves mixing time on site.

Suits contractors sealing IMC

The compound serves installers who need a listed sealing material for conduit runs exposed to explosive atmospheres. It is not intended for general-purpose plumbing, for non-hazardous electrical work, or for applications outside the stated temperature range of minus forty to sixty-five degrees Fahrenheit.

Highlights

  • Seals conduit against explosive gas spread
  • Withstands -40 to 65 degrees Fahrenheit
  • Meets CSA 22.2 No. 20 and UL 886 standards
  • Gray sealing compound in 4 oz pail
  • Designed for IMC and RMC applications

Specifications

BrandHUBBELL KILLARK

Questions about this item

Does the 4 oz pail fit standard conduit hub openings?

The 4 oz pail contains sealing compound for conduit hubs; its container size is 4 oz and the compound is applied inside the hub to seal around conductors.

What is the correct way to apply the gray sealing compound so it meets the UL 886 listing?

Pack the compound firmly around each conductor inside the conduit hub until the hub is filled, avoiding air pockets that would break the gas seal.

When should the gray sealing compound be inspected or replaced after installation?

Inspect the seal whenever the conduit system is opened or after exposure to temperatures outside the -40 to 65 °F range; replace if the compound has cracked, shrunk or lost adhesion.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.