Kfi
KFI ATV Snatch Block conveying
An ATV snatch block redirects winch lines for angled pulls and doubles pulling power
- ATV snatch block redirects winch pulls for angled recovery
- KFI brand builds the block for off-road use
- New condition means full factory specification on arrival
- Listed by manufacturer in 2023 for current design
- Free shipping on manufacturer-direct orders over 75
KFI ATV Snatch Block purpose
The KFI ATV Snatch Block is a lifting and pulling accessory built for all-terrain vehicle recovery. It redirects a winch line to change the pulling angle or increase mechanical advantage. Off-road drivers and utility workers use it when a straight pull is impossible or when the load exceeds a single-line rating. Buyers who need a powered winch or a synthetic rope instead of a block should look elsewhere.
Installation and common issues
The block attaches to a rated anchor point using a shackle or hook not included in the package. The side plate swings open so the rope seats in the sheave without threading the end. Misalignment between the block, rope and anchor causes the line to bind or jump the groove. Dirt and grit that enter the sheave bearing accelerate wear and reduce pulling efficiency.
Behaviour under sustained load
During a long pull the sheave rotates continuously while the rope slides under tension. The bearing absorbs heat generated by friction between the rope and groove. If the load approaches the block's working limit for an extended period, the metal expands and the bearing clearances tighten. Regular lubrication and cooling pauses keep the block operating within its design envelope.
Highlights
- ATV snatch block redirects winch pulls for angled recovery
- KFI brand builds the block for off-road use
- New condition means full factory specification on arrival
- Listed by manufacturer in 2023 for current design
- Free shipping on manufacturer-direct orders over 75
Specifications
| Brand | KFI |
|---|
Questions about this item
How do I confirm the KFI ATV-SB snatch block is functioning correctly after attaching it to my winch line?
After setup, apply light tension and verify the sheave rotates freely without binding while the side plates stay aligned under load.
What components are included with the KFI ATV-SB snatch block and what must I supply separately?
The snatch block unit is included; you must provide a compatible winch rope or cable and a rated shackle or hook for anchoring.
Which KFI snatch block version should I choose for my ATV recovery kit?
The ATV-SB model listed is the single configuration offered by KFI for this product line.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
