Keson Industries
Keson Surveyor Rope 1/4 in x 200 ft Engineers Tape Measure
A 200 ft fiberglass engineers tape with 1/10 ft graduations and 200 lb tensile strength for survey work
- Length7.000
- Width7.600
- MaterialHAWA
- TypeEngineers
- 200 ft reach for long-distance surveys
- 1/10 ft graduations for precise engineering readings
- Fiberglass blade resists stretch and moisture
- 200 lb tensile strength handles heavy tension
- Manual rewind keeps operation simple and reliable
Keson Surveyor Rope 200 ft Engineers Tape
The Keson Surveyor Rope is a 200 ft engineers tape measure designed for surveyors and construction professionals who need long-distance linear measurement in the field. Its fiberglass blade resists stretching and moisture, providing reliable readings across large sites. The white blade with clear coating offers high visibility against varied ground conditions. It is built for outdoor use where steel tapes would be impractical.
Replaces steel long tapes for muddy or wet sites
This rope tape replaces traditional steel long tapes when working in mud, water or heavy vegetation where metal blades corrode, kink or become unreadable. The fiberglass construction eliminates rust and reduces weight for easier handling over 200 ft. The jump is worth it for crews who frequently measure in harsh environments and need a blade that stays straight and legible. Stud markings assist with layout tasks on framing jobs.
Manual rewind handles sustained field use
Under sustained daily use the manual rewind requires steady hand cranking to retract the full 200 ft length without binding. The tensile strength of 100kg resists snapping when the tape is pulled taut over rough terrain. No case means the blade must be cleaned before storage to prevent grit from abrading the graduations. The open design allows rapid debris clearance during continuous operation.
Highlights
- 200 ft reach for long-distance surveys
- 1/10 ft graduations for precise engineering readings
- Fiberglass blade resists stretch and moisture
- 200 lb tensile strength handles heavy tension
- Manual rewind keeps operation simple and reliable
Specifications
| Brand | Keson |
|---|---|
| Length | 7.000 |
| Width | 7.600 |
| Material | HAWA |
| Type | Engineers |
Questions about this item
How wide is the 1/4 in blade and will it fit through standard stake loops?
The blade is 1/4 in wide and made of white fiberglass with a clear coating, so it slides through typical stake loops on survey sites.
What is the correct way to extend and lock the 200 ft fiberglass tape without a lock mechanism?
Pull the tape manually to the needed length; there is no lock, so hold the blade taut by hand while reading the 1/10 ft graduations.
How often should the white fiberglass blade be replaced if the 1/10 ft markings wear off?
Replace the tape when the black 1/10 ft graduations or stud markings become unreadable; the 100 kg tensile strength remains unless fibers are visibly damaged.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
