Keson Industries
Keson Industries PGT181025V 25 ft tape measure 1 in blade orange
A 25 ft engineer's tape with a 1 in blade, 1/10 and 1/100 ft graduations on top and 1/16 in on the bottom, in a durable orange ABS case with toggle lock
- Length6.400
- Width4.600
- MaterialHAWA
- TypeLong
- 25 ft reach for long runs on site
- 1 in steel blade resists corrosion and kinking
- Dual-scale graduations: 1/10 & 1/100 ft top, 1/16 in bottom
- Orange ABS case protects blade from impact and dirt
- Toggle lock holds tape at any point for hands-free reading
What the product is
The Keson PGT181025V is a 25 ft engineer's tape measure with a 1 in blade width. It is built for construction sites and serious projects that require durable, corrosion-resistant steel. The orange ABS case protects the blade from damage during daily use. A toggle lock secures the blade at any point for hands-free reading.
Thermals noise and power
This is a manual hand tool with no motor, battery or electronics, so it produces no heat, noise or power draw. The steel blade resists corrosion in damp site conditions. The ABS case withstands drops and rough handling without cracking. No maintenance is required beyond occasional cleaning of the blade.
Accessories and software impact
No accessories, software or digital features are included with this tape measure. The graduated scale provides 1/10 and 1/100 ft graduations on the top edge and 1/16 in graduations on the bottom edge. The toggle lock mechanism is the only moving part that changes how the tool is operated. Buyers who need magnetic hooks, fractional-inch scales or digital readouts should look elsewhere.
Highlights
- 25 ft reach for long runs on site
- 1 in steel blade resists corrosion and kinking
- Dual-scale graduations: 1/10 & 1/100 ft top, 1/16 in bottom
- Orange ABS case protects blade from impact and dirt
- Toggle lock holds tape at any point for hands-free reading
Specifications
| Brand | Keson |
|---|---|
| Length | 6.400 |
| Width | 4.600 |
| Material | HAWA |
| Type | Long |
Questions about this item
How do I extend and lock the 25 ft blade on the Keson PGT181025V?
Pull the 1 in steel blade out to the needed length, then slide the toggle lock forward to hold it; releasing the lock before the blade retracts prevents the hook from snapping back into the case.
What part of the Keson PGT181025V will need replacement first?
The 1 in steel blade is the wear item; once the printed 1/10 ft, 1/100 ft and 1/16 in graduations fade or the hook bends, the tape must be replaced.
At what point does the 25 ft tape begin to sag when measuring horizontally?
The 1 in wide steel blade typically starts to bow noticeably beyond about 10 ft of unsupported extension, so use a helper or prop for longer runs.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
