Keson Industries
Keson Industries NRS10300H 300 ft tape measure 3/8 in blade
A 300 ft steel tape with 1/100 ft graduations and an automatic-return polycarbonate case in high-visibility orange
- Length16.300
- Width13.000
- TypeLong
- 300 ft reach for long site runs
- 1/100 ft graduations for precise engineering layout
- 3/8 in steel blade resists stretch and wear
- High-visibility orange case spotted quickly on the job
- Automatic blade return speeds rewind without a lock
Keson NRS10300H 300 ft Engineer's Tape
This Keson NRS10300H is a 300 ft long tape measure designed for engineers and surveyors who need extended reach on large sites. The steel blade is 3/8 in wide and marked in SAE Engineers Scale with 1/100 ft graduations. A high-visibility orange polycarbonate case houses the automatic return mechanism. The nonmagnetic single hook anchors at the zero point for accurate readings.
Verify scale and hook before ordering
Confirm that your workflow uses feet and hundredths of a foot rather than metric or fractional-inch markings. The blade is single-sided, so measurements read in one orientation only. The tip is a nonmagnetic single hook; it will not cling to ferrous surfaces. The lock type is nonlocking, meaning the blade retracts freely unless held. Ensure these traits match the tasks you perform.
Fits in a tool bag or vehicle compartment
The case measures 13 1/2 in long and the overall dimensions are 16.300 by 13.000 units, allowing it to sit in a standard tool bag or truck cubby. Automatic blade return speeds up rewind after long pulls, freeing the user from manual cranking. Double-sided graduation marks are not present, so plan for single-face reading. The bright orange case helps locate the tool quickly on busy job sites.
Highlights
- 300 ft reach for long site runs
- 1/100 ft graduations for precise engineering layout
- 3/8 in steel blade resists stretch and wear
- High-visibility orange case spotted quickly on the job
- Automatic blade return speeds rewind without a lock
Specifications
| Brand | Keson |
|---|---|
| Length | 16.300 |
| Width | 13.000 |
| Type | Long |
Questions about this item
Does the 300 ft engineer's tape measure include a case or is the polycarbonate case sold separately?
The tape measure comes with a high-visibility orange polycarbonate case that measures 13 1/2 in long; no separate case purchase is required.
Should I choose the single-sided 3/8 in steel blade or is a double-sided option available for the NRS10300H?
This model uses a single-sided steel blade 3/8 in wide with SAE engineers-scale graduations marked in 1/100 ft increments; a double-sided blade is not offered on this item.
How does the 1/100 ft graduation on the 300 ft blade translate when I am measuring on site?
Each mark represents one-hundredth of a foot, so you can read measurements directly in decimal feet without converting inches on the jobsite.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
