Keson Industries
Keson Industries MC-18-50 50 ft tape measure 1/2 in blade
A 50 ft fiberglass tape with 1/8 in graduations and a 1/2 in blade for long-distance layout work
- Length7.000
- Width5.600
- MaterialHAWA
- TypeLong
- 50 ft reach for long-distance layouts
- 1/2 in blade width for clear readability
- 1/8 in graduations for fine detail work
- Fiberglass blade resists stretching and moisture
- Hook end clips to belt or pouch for quick access
50 ft long tape measure
The Keson MC-18-50 is a 50 ft long tape measure with a 1/2 in fiberglass blade. It uses SAE graduations marked to 1/8 in for clear readings. The hook end secures the tool to a belt or pouch for quick access on site. It suits surveyors, landscapers and builders who need extended reach.
Check blade material and graduation style
Confirm that a fiberglass blade meets the abrasion resistance your jobs demand. Verify that 1/8 in SAE graduations match the measurement system used in your plans. Ensure the 50 ft length covers the longest single run you expect to measure without repositioning. The open reel design means debris can enter the housing during use.
Hook end and open reel
The hook end lets the tape hang from a belt loop or tool pouch so it stays within reach while you move around a plot. The open reel allows rapid blade retraction and lets you rinse out mud or dust after outdoor work. No case or carrying strap is included with this model. The fiberglass blade resists stretching but can kink if pulled sharply around corners.
Highlights
- 50 ft reach for long-distance layouts
- 1/2 in blade width for clear readability
- 1/8 in graduations for fine detail work
- Fiberglass blade resists stretching and moisture
- Hook end clips to belt or pouch for quick access
Specifications
| Brand | Keson |
|---|---|
| Length | 7.000 |
| Width | 5.600 |
| Material | HAWA |
| Type | Long |
Questions about this item
What comes in the box with the Keson MC-18-50 tape measure and is anything else needed to use it?
The tape measure is supplied ready to use with its 50 ft fiberglass blade, 1/2 in width and 1/8 in graduations in SAE units, plus a hook end for belt or pouch attachment; no extra parts are required.
How do I decide between the available versions or capacities of this tape measure?
The MC-18-50 is a single 50 ft long-tape model with a 1/2 in blade and 1/8 in SAE graduations; there are no alternative lengths or blade widths listed for this product.
What does the 50 ft length mean when I am actually measuring on site?
The 50 ft blade lets you span long distances such as foundations, fencing runs or conduit layouts in one pull, while the 1/8 in graduations on the fiberglass tape give readable SAE increments across the full reach.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
