Keson Industries
Keson Industries 30 ft Steel SAE Tape Measure Black/Orange PG1830WIDEV
A 30 ft steel tape measure with SAE graduations in 1/16 in and 1/32 in for the first 12 in, a finger brake, and a rubber-grip ABS case
- Length7.000
- Width5.000
- TypeMeasuring & Layout Tools
- 30 ft steel blade covers long runs
- 1/16 in and 1/32 in graduations give fine readings
- Finger brake locks blade at any point
- ABS case with rubber grip resists drops
- Automatic return retracts blade smoothly
What the tape measure is and who it suits
This Keson Industries tape measure provides a 30 ft steel blade with SAE graduations down to 1/16 in and finer 1/32 in marks for the first 12 in. The 1 3/16 in wide single-sided blade uses an automatic return and a slide lock for quick one-handed operation. A non-magnetic single hook anchors at the zero point, making the tool practical for general layout, carpentry and DIY tasks where metric readings are not required.
What to verify on your current setup
Check that you work exclusively in feet and inches, because the blade carries no metric markings. Confirm that a non-magnetic hook suits your surfaces; it will not cling to ferrous metal edges. Ensure the 1 3/16 in blade width fits the spaces you measure, and that a single-sided scale meets your reading preference. The ABS case with rubber grip measures 3 1/4 in long, so verify it fits your tool belt or pouch.
Build quality and daily implications
The steel blade resists wear while the ABS plastic case with rubber overmould absorbs drops and provides a secure hold. A finger brake adds extra control when the slide lock is not engaged. Black and orange colouring makes the case easy to spot on a busy jobsite. Automatic blade return speeds repetitive measures, and the single hook keeps the zero reference consistent for reliable inside and outside readings.
Highlights
- 30 ft steel blade covers long runs
- 1/16 in and 1/32 in graduations give fine readings
- Finger brake locks blade at any point
- ABS case with rubber grip resists drops
- Automatic return retracts blade smoothly
Specifications
| Brand | Keson |
|---|---|
| Length | 7.000 |
| Width | 5.000 |
| Type | Measuring & Layout Tools |
Questions about this item
What comes in the box and is anything else needed to start measuring?
The tape measure ships ready to use with its ABS plastic case, rubber grip, finger brake, slide lock and automatic blade return already assembled. No extra parts or batteries are required.
How do the two graduation scales on the first 12 inches differ from the rest of the 30 ft blade?
The first 12 inches show both 1/16 in and 1/32 in marks, while the remaining length is marked in 1/16 in increments only, so choose based on the finest resolution you need for detail work.
What does the 30 ft blade length mean when the hook is butted against a surface?
The zero point is at the hook end, so the reading starts at zero when the hook is pressed flat against the work piece and extends to 30 ft when fully deployed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
