Keson Industries
Keson Industries 1/2 in 100 ft 30 m Black Long Tape Measure
Fiberglass blade spans 30 m and 100 ft with 1/8 in and 2 mm graduations in a black metal case
- Length1.300
- Width7.800
- MaterialHAWA
- TypeLong
- 30 m / 100 ft blade covers long runs
- Fiberglass blade resists stretch and moisture
- Clear coating protects yellow/white graduations
- Metal case shields tape from impact
- Folding hook anchors on edges and studs
Keson 100 ft / 30 m Long Tape Measure
The Keson long tape measure provides a 100 ft or 30 m blade for extended linear measurements. A folding hook at the zero point helps anchor the tape on edges or studs. The fiberglass blade is coated in clear material and printed with SAE and metric graduations including 1/8 in and 2 mm marks. A closed black metal case protects the blade during transport and storage.
Suited for outdoor layout and stud marking
Builders and surveyors who need a single tape for imperial and metric work will find the dual graduations and stud markings useful. The manual rewind and lack of a lock mean the blade must be managed by hand, so users who prefer a self-locking or powered return mechanism should consider a different style. No belt clip is fitted, limiting hands-free carry options.
Simple manual operation with basic care
Pull the blade out by the folding hook, read the yellow and white markings, then turn the handle to rewind the tape into the closed metal case. Dirt or moisture on the fiberglass blade can make the graduations harder to read, so wipe the blade clean before retracting it. The absence of a lock requires steady tension while measuring to prevent the tape from creeping back.
Highlights
- 30 m / 100 ft blade covers long runs
- Fiberglass blade resists stretch and moisture
- Clear coating protects yellow/white graduations
- Metal case shields tape from impact
- Folding hook anchors on edges and studs
Specifications
| Brand | Keson |
|---|---|
| Length | 1.300 |
| Width | 7.800 |
| Material | HAWA |
| Type | Long |
Questions about this item
What surface must the 1/2 in wide blade hook onto for the zero point to read correctly?
The folding hook engages a flat edge or corner so the zero point aligns with the 1/8 in and 2 mm graduations on the yellow/white fiberglass blade.
Will the metal case and manual rewind still operate smoothly if I keep using my older Keson tapes alongside this 30 m model?
Yes, the closed metal case and manual rewind are independent mechanisms; they do not interfere with other tapes and require no shared parts or power.
How can I verify the 100 ft blade is feeding and retracting properly after first use?
Pull the blade out fully, check that the yellow/white graduations read continuously to 30 m, then manually rewind and confirm the folding hook seats flush in the black case.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
