We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 10-inch marine subwoofer with illuminated UV-resistant grille and rubber surround

KENWOOD

KENWOOD Excelon XM1041BL 10" 1300W IPX6 Subwoofer with Illumination (Black)

SKU CH-VTRY-VT3H8

A 10-inch marine subwoofer rated for 1300W peak and 300W RMS with IPX6 water resistance and variable LED illumination

  • TypeSubwoofer
  • Speaker Size10"
  • Features10" subwoofer with 1300W peak power and 300W RMS output
  • 10-inch cone delivers deep bass with 300W RMS power handling
  • IPX6-rated polypropylene cone and rubber surround withstand heavy water spray
  • UV-resistant grille protects against sun damage during extended outdoor use
  • Variable colour and pattern LED illumination adjustable via included remote
  • 4-ohm impedance and 40Hz–300Hz response suit marine audio systems

Built for outdoor bass

The Kenwood Excelon XM1041BL is a 10-inch subwoofer rated for 1300W peak and 300W RMS output. Its IPX6 water-resistant polypropylene cone and rubber surround withstand spray and moisture. A UV-resistant grille protects the driver during extended sun exposure. Integrated LED illumination offers variable colours and patterns controlled by the included remote.

Upgrade from basic marine speakers

Factory marine speakers rarely reach the 40Hz lower limit this subwoofer achieves, so the jump is worth it when you want audible low-frequency impact on open water. The 4-ohm impedance matches common marine amplifiers without wiring changes. Boats or off-road vehicles with no dedicated subwoofer location gain the most from adding this unit. Buyers who need output below 40Hz or higher sensitivity than 84 dB will not be satisfied.

Fits standard 9-1/8 cutout

The 232 mm cutout diameter and 140 mm mounting depth suit many existing marine enclosures. A compact 46.5 mm top height keeps the grille profile low against deck surfaces. Wiring uses standard speaker terminals compatible with typical marine amp outputs. The remote control requires a clear line of sight to the grille sensor for reliable lighting changes. Installers should verify the enclosure volume suits a 10-inch driver before mounting.

Highlights

  • 10-inch cone delivers deep bass with 300W RMS power handling
  • IPX6-rated polypropylene cone and rubber surround withstand heavy water spray
  • UV-resistant grille protects against sun damage during extended outdoor use
  • Variable colour and pattern LED illumination adjustable via included remote
  • 4-ohm impedance and 40Hz–300Hz response suit marine audio systems

Specifications

BrandKenwood
TypeSubwoofer
Speaker Size10"
Features10" subwoofer with 1300W peak power and 300W RMS output

Questions about this item

What is the cutout diameter and mounting depth needed for the XM1041BL?

The subwoofer requires a 9-1/8" (232 mm) cutout diameter and 5-1/2" (140 mm) of mounting depth behind the panel.

How is the LED illumination on this subwoofer controlled during installation?

A supplied remote control adjusts the variable colour and pattern illumination; ensure the remote receiver has line of sight or a clear wiring path.

When should the rubber surround on the IPX6 cone be inspected or replaced?

Check the rubber surround annually for UV cracking or salt deposits; replace it if the cone movement becomes uneven or the seal is compromised.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.