KENTEK
KENTEK 3 ft 18 AWG 10 A 125 V NEMA 1-15P to IEC 320 C7 power cord black
Non-polarised figure-8 power cord, 3 ft, 18 AWG, rated 10 A at 125 V, UL and CSA listed
- TypePower Cables
- Non-polarised C7 connector plugs either way round
- 3 ft length keeps laptop adapters tidy
- 18 AWG wire rated for 10 A at 125 V
- UL and CSA listed for electrical safety
- Built by an ISO 9001:2000 certified manufacturer
AC Power Cable 3 ft Non-Polarized Figure-8
This KENTEK power cord connects a standard NEMA 1-15P wall outlet to a non-polarized IEC 320 C7 inlet. The figure-8 connector fits laptop adapters and devices such as the slim PS3 console. It is built with 18 AWG conductors rated for 10 A at 125 V and carries UL and CSA markings.
Suitable for two-prong equipment needing a C7 inlet
The cord suits any device that accepts a non-polarized C7 connector and draws up to 10 A at 125 V. Equipment requiring a polarized C7, a three-pin inlet, or a different connector shape will not accept this cable. Buyers needing a longer reach or a heavier gauge should select another lead.
18 AWG conductor gauge rated 10 A 125 V
The wire gauge and current-voltage rating determine whether the cord can safely supply your device. Check the equipment label for its amperage and voltage requirements before connecting. The UL and CSA listings confirm the cable meets North American safety standards.
Highlights
- Non-polarised C7 connector plugs either way round
- 3 ft length keeps laptop adapters tidy
- 18 AWG wire rated for 10 A at 125 V
- UL and CSA listed for electrical safety
- Built by an ISO 9001:2000 certified manufacturer
Specifications
| Type | Power Cables |
|---|
Questions about this item
Which devices already need a figure-8 IEC 320 C7 inlet to use this cord?
Laptop power adapters, the slim PS3 console and other electronics that accept a non-polarised C7 connector will work directly with this cable.
Can the NEMA 1-15P plug share a North American outlet with older two-prong equipment?
Yes, the non-polarised 1-15P blades fit standard 125 V outlets and can be inserted either way alongside legacy devices.
How do I confirm the cord is delivering power after I connect it?
The attached device powers on normally and the UL, CSA and ISO 9001:2000 markings on the cable indicate it meets the rated 10 A 125 V specification.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



