KEHIPI
KEHIPI WG-026/5 50 Test Leads 100 Alligator Clips 20.5in 22AWG electrician tool
Set of 50 test leads with 100 nickel-plated alligator clips on 20.5-inch 22-AWG copper wire for light electrical testing
- 50 test leads in five colours simplify circuit identification
- 100 nickel-plated steel alligator clips with PVC insulators ensure secure connections
- 5 inch 22-AWG copper wires with PVC insulation suit light electronics work
- 6 inch soldered and stamped lead ends provide reliable conduction
- Suitable for experiments, breadboarding, labs, shops, schools, home and industry
Test-lead set for light electronics
The KEHIPI WG-026/5 kit supplies 50 test leads in five colours — green, white, black, yellow and red — with ten leads of each colour. Every lead terminates in a nickel-plated steel alligator clip fitted with a PVC insulator and vinyl cover. The 20.5-inch wires use 22-AWG copper with PVC insulation and are soldered and stamped to the clips for secure conduction.
Behaviour during extended use
The 22-AWG copper conductors are intended for light electronics work such as breadboarding, classroom experiments and bench testing. Under sustained low-current loads the PVC insulation remains stable and the strong spring clips maintain consistent contact without overheating. The set is not rated for high-power or continuous industrial duty cycles.
22-AWG wire gauge decides suitability
The 22-AWG cross-section limits the leads to low-current signal and measurement tasks. Buyers who need to carry higher currents or work with larger terminals must choose a heavier-gauge lead set.
Highlights
- 50 test leads in five colours simplify circuit identification
- 100 nickel-plated steel alligator clips with PVC insulators ensure secure connections
- 5 inch 22-AWG copper wires with PVC insulation suit light electronics work
- 6 inch soldered and stamped lead ends provide reliable conduction
- Suitable for experiments, breadboarding, labs, shops, schools, home and industry
Specifications
| Brand | WGGE |
|---|---|
| Model | WG-026/5 |
Questions about this item
Does the 22-AWG copper wire and 1.6-inch test lead handle continuous bench use without overheating?
The 22-AWG copper wire with PVC insulation is rated for light electronics work and stays cool during typical all-day bench testing.
What must I already own to use the 50 test leads and 100 alligator clips?
You need a multimeter, breadboard, or similar test instrument with banana jacks or probe points that accept the 1.6-inch leads.
Will the nickel-plated steel clips grip the thicker posts on my vintage test gear?
The strong spring clips open wide enough for standard component leads and most older binding posts, while the vinyl covers prevent shorts.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
