KEHIPI
KEHIPI WG-014 Self-Adjusting Wire Stripper AWG 10-24 3-in-1 Electrician Tool
Self-adjusting jaws strip, cut and crimp copper or aluminium wire from AWG 10 to 24 with a micro-adjust knob for smaller gauges
- Strips, cuts and crimps wire from AWG 10-24
- Self-adjusting jaws handle copper and aluminium cables automatically
- Copper swivel knob micro-adjusts tension for wires smaller than 24 AWG
- Non-slip comfort grip reduces hand fatigue during extended use
- Adjustable stopper controls strip length to protect the conductor
3-in-1 Electrician Tool AWG 10-24
The KEHIPI WG-014 combines stripping, cutting and crimping in a single 8-inch hand tool. Self-adjusting jaws handle copper and aluminium conductors from AWG 10 to 24, while a copper micro-adjustment knob fine-tunes tension for smaller gauges. Hardened alloy steel blades and an adjustable length stopper deliver repeatable results without damaging the conductor.
For electrical installers
Suited to professionals and DIY users who need one tool for preparation, termination and cutting tasks on solid or stranded wire up to 6 mm². Not for buyers who require a calibrated crimp force setting, a ratchet mechanism, or interchangeable dies for specialised terminals. Also unsuitable for heavy-duty armoured cable or high-volume production lines.
AWG 10-24 stripping range with micro-adjustment
The tool strips insulation from 0.5 mm to 6.0 mm diameter conductors across the full AWG 10-24 span. A thumbwheel swivel knob adds precise jaw clearance for wires smaller than 20 AWG, and the integrated stopper sets strip lengths from 0.2 mm to 6.0 mm. This single specification defines the wire sizes the tool can process reliably.
Highlights
- Strips, cuts and crimps wire from AWG 10-24
- Self-adjusting jaws handle copper and aluminium cables automatically
- Copper swivel knob micro-adjusts tension for wires smaller than 24 AWG
- Non-slip comfort grip reduces hand fatigue during extended use
- Adjustable stopper controls strip length to protect the conductor
Specifications
| Brand | WGGE |
|---|---|
| Model | WG-014 |
Questions about this item
Does the KEHIPI WG-014 come with any accessories or do I need to buy blades separately?
The tool is a complete 3-in-1 unit with integrated stripping jaws, cutting blades, and crimping dies. No separate accessories or blades are required for AWG 10-24 stripping, cutting, or crimping tasks.
How do I choose between the different crimping ranges marked on the tool for insulated and non-insulated terminals?
Use the 22-10 AWG section for insulated terminals. For non-insulated terminals, select the specific nest marked 22-18 AWG, 16-14 AWG, or 12-10 AWG that matches your connector size.
What does the AWG 10-24 rating mean when I am stripping actual copper or aluminum wire in the workshop?
It means the self-adjusting jaws automatically grip and strip insulation from solid or stranded copper and aluminum conductors between 10 AWG and 24 AWG (0.5-6.0 mm²) without manual jaw adjustment.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
