KEHIPI
KEHIPI KWS-102 65Mn Steel Hand Wrench 14.48 in x 5.99 in
Cuts and strips 10 to 20 AWG wires with 30° angled jaws and a TPR handle
- TypeKWS-102
- Size/Dimensions14.48 in x 5.99 in x 0.1 in
- Material65Mn steel
- Selling UnitCount
- Cuts copper, aluminium and insulated wires cleanly with 65Mn steel jaws
- Strips 10-20 AWG conductors precisely using built-in stripping function
- 30° angled jaws reach pins in tight circuit-board spaces
- TPR handle and hidden spring reduce fatigue during repetitive tasks
- 48 in overall length gives ample leverage for flush cutting
65Mn Steel Multi-Function Cutting Pliers
The KEHIPI KWS-102 is a 14.48 in by 5.99 in hand tool forged from 65Mn steel for clean cuts on copper, aluminium and sheathed core wires. It also strips 10 to 20 AWG conductors precisely and trims electronic component pins on circuit boards. The 30° angled jaws reach confined areas while a TPR handle and hidden spring reduce fatigue during extended use.
Upgrade from single-purpose snips
This tool replaces separate cutters, strippers and pin nippers by combining cutting, stripping and fine trimming in one frame. The jump is worth it when a technician regularly works with 10 to 20 AWG insulated terminals and needs angled access in tight enclosures. It is not suited for heavy-gauge cable or high-volume production lines that demand dedicated hydraulic or ratcheting equipment.
Capacity headroom for bench electronics
The jaws cleanly sever copper and aluminium wires within the 10 to 20 AWG stripping range and handle insulated terminals up to 22 AWG for crimping tasks. Cutting capacity drops off beyond the specified wire sizes and the slim profile limits leverage on thicker conductors. The 36-month service period covers defects but does not extend the mechanical limits of the 65Mn steel edges.
Highlights
- Cuts copper, aluminium and insulated wires cleanly with 65Mn steel jaws
- Strips 10-20 AWG conductors precisely using built-in stripping function
- 30° angled jaws reach pins in tight circuit-board spaces
- TPR handle and hidden spring reduce fatigue during repetitive tasks
- 48 in overall length gives ample leverage for flush cutting
Specifications
| Brand | KAIWEETS |
|---|---|
| Model | KWS-102 |
| Type | KWS-102 |
| Size/Dimensions | 14.48 in x 5.99 in x 0.1 in |
| Material | 65Mn steel |
| Selling Unit | Count |
| Part Number | KWS-102 |
Questions about this item
How much space does the 14.48 in by 5.99 in frame need in a tool drawer?
The cutters measure 14.48 in long by 5.99 in wide by .1 in thick, so a flat compartment at least that large will hold them without forcing the angled jaws.
What is the correct way to set the stripper for 10-20 AWG wire without nicking the conductor?
Select the 10-20 AWG stripping hole, insert the wire to the adjustable stopper, squeeze the TPR handles until the hidden spring returns them open, then pull straight out — twisting the wire is the step that damages strands.
When should the 65Mn steel jaws be replaced or dressed?
Replace the tool when the flush cutting edges no longer sever 10-22 AWG copper cleanly or the stripping holes for 10-24 AWG start tearing insulation instead of slicing it.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
