We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A wireless remote and four controllers for RGBW LED strips

KEHIPI

KEHIPI control kit 4 zones 2.4GHz RGBW 5V 12V 24V

SKU CH-3MX0-RMEX1

Controls four independent LED zones with a 2.4GHz remote and four PWM controllers for 5V, 12V or 24V RGBW strips

  • Four-zone group control with unlimited controllers per zone
  • 4 GHz wireless remote reaches 98 feet in open areas
  • Touch wheel and buttons for simple brightness and colour adjustment
  • Supports 5 V, 12 V and 24 V PWM RGBW LED strips
  • Compatible with 5050, 3528, 5630 SMD and FCOB COB strips only

4-Zone Wireless LED Control Kit

This KEHIPI kit pairs one RC03RFB 2.4GHz remote with four C04RF controllers for PWM RGBW LED strips. It supports 5-wire 5050SMD, 3528SMD, 5630SMD, FCOB and COB strips running at DC5V, DC12V or DC24V. The system is designed for installers who need independent zone management across multiple areas.

2.4GHz RF Remote and Synchronised Controllers

The RC03RFB remote uses a touch wheel and buttons to adjust 16 million colours and brightness across 4 separate zones. Each controller can be paired to one or more remotes and relays signals to the next unit up to 98 feet away in open air. The two power inputs accept a maximum of 5A and 12A respectively.

Not for SPI Addressable Strip Projects

Buyers driving WS2811, WS2812B, WS2813, WS2814, WS2815 or SK6812 pixel strips cannot use this kit because it only outputs PWM signals. Installers who need more than four independent zones or who require wired DMX or DALI integration should look at a different control platform.

Highlights

  • Four-zone group control with unlimited controllers per zone
  • 4 GHz wireless remote reaches 98 feet in open areas
  • Touch wheel and buttons for simple brightness and colour adjustment
  • Supports 5 V, 12 V and 24 V PWM RGBW LED strips
  • Compatible with 5050, 3528, 5630 SMD and FCOB COB strips only

Specifications

BrandBTF-LIGHTING

Questions about this item

Will the PWM RGBW 5-pin LED strips need replacement if I later switch to SPI addressable strips like WS2812B?

Yes, the controllers only support PWM 5050SMD, 3528SMD, 5630SMD, FCOB and COB RGBW 5-wire strips and cannot work with SPI IC strips such as WS2811, WS2812B, WS2813, WS2814, WS2815 or SK6812.

What current limit will I hit first on the two power interfaces when running all four zones at full brightness?

The first power interface allows a maximum of 5 A and the second allows 12 A, so the 5 A limit will be reached before the 12 A limit.

How much heat or noise does the 2.4 GHz remote and controller kit produce during continuous all-day operation?

The kit uses wireless RF transmission with no moving parts, so it generates no audible noise and negligible heat during continuous use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.