We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five V-shaped JST SM 3-pin splitter cables with red green white 22AWG wires 15 cm long

KEHIPI

KEHIPI 5 PCS JST SM 3PIN V Shape 1 to 2 Connectors 15CM 22AWG Wire

SKU CH-AMJB-XC449

Pack of five 3-pin JST SM V-split cables with 15 cm 22 AWG wire for addressable LED strips and compatible controllers

  • Color MappingMulticolor
  • Splits one female plug into two male 3‑pin connectors for parallel strip runs
  • 15 cm 22 AWG leads keep voltage drop low on short extensions
  • Solderless push‑fit design lets you join strips or link a controller in seconds
  • Compatible with WS2811, WS2812B, WS2814, SK6812 and FCOB addressable LED types
  • Rated for 5 V to 24 V low‑voltage LED projects

Five-piece JST SM 3-pin splitter kit

This pack supplies five V-shaped 1-to-2 JST SM connectors on 15 cm 22 AWG leads, letting a single three-pin output drive two addressable LED strips or modules. The 5 V–24 V low-voltage rating matches common WS2811, WS2812B, WS2814, SK6812 and FCOB WS2811 IC strips, and the red-green-white wire colours simplify polarity checks before power-up.

Installers extending SPI addressable runs

Builders who need to branch one controller channel into two parallel strips will find the plug-and-play format convenient, while the short 15 cm pigtails keep voltage drop minimal on typical desktop or accent-lighting runs. Users planning longer daisy-chains or higher-current loads should consider that the 22 AWG conductors and unspecified signal integrity over extended lengths may introduce flicker or dimming, so very long runs or high-density matrices are not a good fit.

Ready-to-use pigtails with no soldering

Each connector arrives pre-crimped and insulated, so the only work required is aligning the three conductors and pressing the housings together; the leads can be trimmed shorter if the 15 cm reach is excessive. The package includes exactly five splitter assemblies and no additional controllers, mounting hardware or configuration software, so any SP105E, SP107E, SP108E, SP611E, SP602E, SP530E, SP630E, SP638E or DR03W controller must be sourced separately.

Highlights

  • Splits one female plug into two male 3‑pin connectors for parallel strip runs
  • 15 cm 22 AWG leads keep voltage drop low on short extensions
  • Solderless push‑fit design lets you join strips or link a controller in seconds
  • Compatible with WS2811, WS2812B, WS2814, SK6812 and FCOB addressable LED types
  • Rated for 5 V to 24 V low‑voltage LED projects

Specifications

BrandBTF-LIGHTING
Color MappingMulticolor

Questions about this item

What LED strip types do I need to already have for these 3-pin JST SM connectors to fit?

They fit 3-pin addressable strips such as WS2811, WS2812B, WS2812, WS2814, SK6812 and FCOB WS2811 IC single-colour, CCT or RGB strips.

Will these 15 cm 22 AWG extension cables cause signal issues on my existing WS2812B run?

The supplier notes that long extensions can introduce voltage drop and signal instability, showing as irregular flickering or dimming; keep total cable length short.

How can I confirm the 5 V to 24 V splitter is working after I plug it in?

The connected LED strip should light without flicker, show correct colours in the expected order and respond smoothly to the controller.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.