KEHIPI
KEHIPI 24V to 12V 30A 360W Waterproof Buck Converter Transformer
A waterproof DC-DC buck converter steps 24 V down to 12 V at 30 A with 95 % efficiency and IP68 protection
- Type24V to 12V 30A
- Colormulticolor
- Weight292 grams
- Delivers stable 12 V 30 A 360 W output from 18–32 V input
- Up to 95 % conversion efficiency via synchronous rectification
- Smart chip provides over-current, over-load, short-circuit and over-heat protection
- IP68-rated aluminium housing with epoxy potting is fully waterproof and dustproof
- Operates reliably from −40 °C to 80 °C
What this converter does
This KEHIPI buck converter steps a 24V nominal source down to a stable 12V output rated at 30A and 360W. It accepts an input range from 18V to 32V and uses synchronous rectification to reach up to 95% efficiency with only 50mV ripple. The unit is built into a compact aluminium shell with epoxy potting that provides IP68-rated waterproof, dust-proof and shock-resistant operation from -40°C to 80°C.
Protection and installation benefits
A smart chip adds over-current, over-load, low-load, short-circuit and over-heat protection that resets automatically once the fault clears. The 292g potted module needs no extra sealing and can be mounted directly on a vehicle chassis or in an engine bay without a separate enclosure. A two-second start-up delay prevents inrush current from tripping upstream fuses when the system powers on.
Check before ordering
Verify that your source voltage stays within the 18V to 32V window under all load conditions. Confirm the total 12V load does not exceed 30A continuous or 360W. Ensure wiring and fuses on both the input and output sides are rated for at least 30A and that the mounting location allows airflow around the aluminium case for heat dissipation. This unit is not suited for loads requiring more than 30A or for input voltages outside the stated range.
Highlights
- Delivers stable 12 V 30 A 360 W output from 18–32 V input
- Up to 95 % conversion efficiency via synchronous rectification
- Smart chip provides over-current, over-load, short-circuit and over-heat protection
- IP68-rated aluminium housing with epoxy potting is fully waterproof and dustproof
- Operates reliably from −40 °C to 80 °C
Specifications
| Brand | HOMELYLIFE |
|---|---|
| Model | FIT0145 |
| Type | 24V to 12V 30A |
| Color | multicolor |
| Weight | 292 grams |
Questions about this item
Does the aluminium shell and epoxy potting need any periodic resealing to keep the IP68 rating?
The compact aluminium shell with epoxy potting is 100% waterproof and rated IP68; no resealing or maintenance of the enclosure is required.
What protection activates first when the converter runs continuously at the 30 A 360 W limit?
Over-heat intelligent protection will trigger before sustained full-load operation can damage the unit.
How much heat and noise should I expect from the potted aluminium case during all-day use?
The epoxy-potted aluminium housing provides silent, fan-free heat dissipation; the 95% maximum efficiency keeps waste heat low even at 360 W continuous load.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
