We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Twenty pairs of JST SM three-pin connectors with 15cm 22awg wires, male and female ends

KEHIPI

KEHIPI 20 Pairs JST SM 3 Pin Wire Cap Connectors 15cm 22awg

SKU CH-AJZW-M5TZ1

Twenty pairs of 15 cm JST SM three-pin cables connect WS2811, WS2812, WS2814 and SK6812 LED strips without soldering

  • TypeModern
  • Solder-free installation speeds up LED strip projects
  • 20 pairs supply enough connectors for long runs
  • 15 cm leads give flexible routing room
  • 22 AWG wire handles typical low-voltage LED current
  • Compatible with WS2811, WS2812, WS2814 and SK6812 strips

Plug-and-play LED strip connectors

This pack contains 20 pairs of JST SM 3-pin male and female connectors pre-crimped to 15 cm of 22 AWG wire. They are designed for WS2811, WS2812, WS2812B, WS2814 and SK6812 addressable LED strips. The ready-made leads remove the need for soldering when joining or extending low-voltage lighting runs.

Installers who want fast, solder-free joints

Suitable for hobbyists and technicians building WS2811, WS2812B or SK6812 projects who prefer a plug-in connection. Not intended for strips that use a different pin count, pitch or wire gauge, or for high-current power distribution beyond the rating of 22 AWG cable.

3-pin JST SM interface for WS281x/SK6812 strips

The connectors match the 3-pin JST SM footprint used by WS2811, WS2812, WS2812B, WS2814 and SK6812 LED strips. Verify that your strip uses this exact 3-pin arrangement and wire colour order before connecting.

Highlights

  • Solder-free installation speeds up LED strip projects
  • 20 pairs supply enough connectors for long runs
  • 15 cm leads give flexible routing room
  • 22 AWG wire handles typical low-voltage LED current
  • Compatible with WS2811, WS2812, WS2814 and SK6812 strips

Specifications

BrandBTF-LIGHTING
TypeModern

Questions about this item

What spacing do the JST SM 3-pin plugs on these connectors match?

The plugs are JST SM 3-pin male and female types designed for WS2811, WS2812B, WS2814 and SK6812 LED strips

How do I connect the 15 cm 22 AWG wires without soldering?

Push each pre-crimped JST SM plug onto the matching strip header; verify wire colours and polarity before powering the WS2811, WS2812B, WS2814 or SK6812 strip

When should I replace a pair from the 20-pair set?

Replace a pair if the 22 AWG wire insulation is cut, the JST SM housing cracks or the pins no longer latch securely on WS2811, WS2812B, WS2814 or SK6812 strips

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.