KEHIPI
KEHIPI 10TON-H 10-Ton Hydraulic Crimping Plier with 9 Dies
Hydraulic crimping plier delivers 10 tons of force for 12 to 2/0 AWG battery cables and 1/16, 1/8, 3/16 inch stainless steel wire rope with nine interchangeable dies and 180-degree rotating head
- Size/Dimensions12.2 in x 2.6 in x 0.1 in
- MaterialHigh Carbon Steel
- Item Count1
- 10-ton hydraulic force crimps battery cables 12-2/0 AWG and stainless rope 1/16-3/16 in
- 180-degree rotating head reaches tight engine bays and railing posts with ease
- Quick-change die latch swaps nine hardened dies in seconds without extra tools
- Heat-treated 5140 steel jaws and chrome-plated dies resist fracture through heavy use
- Rugged case holds crimper, dies, seals and manual for organised transport and storage
Hydraulic Crimping Tool for Battery & Cable Work
This KEHIPI 10TON-H hydraulic crimper delivers 10 tons of force for battery terminals from 12 to 2/0 AWG and stainless steel wire ropes of 1/16, 1/8 and 3/16 inch. The 180° rotating head reaches tight engine bays and railing posts. Nine hardened dies and seal rings come in a rugged case.
Suited for Electricians & DIY Rigging.
Electricians, welders and boat owners crimping battery cables or cable railing hardware will find the range and rotating head practical. Users needing crimps above 2/0 AWG or rope sizes beyond 3/16 inch should look at a larger-capacity tool. The hand-pump action also requires manual effort for each cycle.
10-Ton Force with 9 Dies Covers 12–2/0 AWG & Three
The single specification that decides fit is the combined crimping range: 12 through 2/0 AWG for battery lugs plus 1/16, 1/8 and 3/16 inch for stainless wire rope. If your terminals or ropes fall outside these exact sizes, this kit cannot crimp them.
Highlights
- 10-ton hydraulic force crimps battery cables 12-2/0 AWG and stainless rope 1/16-3/16 in
- 180-degree rotating head reaches tight engine bays and railing posts with ease
- Quick-change die latch swaps nine hardened dies in seconds without extra tools
- Heat-treated 5140 steel jaws and chrome-plated dies resist fracture through heavy use
- Rugged case holds crimper, dies, seals and manual for organised transport and storage
Specifications
| Brand | Brileine |
|---|---|
| Model | 10TON-H |
| Size/Dimensions | 12.2 in x 2.6 in x 0.1 in |
| Material | High Carbon Steel |
| Item Count | 1 |
Questions about this item
How can I verify the hydraulic crimper is delivering the full 10-ton force after setup?
Perform a test crimp on a 2/0 AWG battery terminal using the matching die; a uniform, flash-free hexagonal impression confirms the tool is generating rated pressure.
What comes in the box and which items must be purchased separately?
The kit includes the hydraulic crimper, nine hardened dies covering 12–2/0 AWG and 1/16″, 1/8″, 3/16″ stainless wire rope, spare seal rings, a rugged carrying case and a user manual; no additional components are required for the listed crimping ranges.
Which die set should I select for 1/8″ stainless steel cable railing?
Use the die marked 1/8″ from the included nine-die set; it is sized specifically for 1/8″ stainless wire rope and pairs with the 10-ton hydraulic head for a secure crimp.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
