We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular black adapter plate with LED lights, multiple ports and a quarter-inch mounting screw

Kastar

Kastar NP-F Adapter Plate LED 8.4V 5A 5521 12V 2A 5525 16.8V D-Tap 5V USB

SKU CH-QCYX-K75DP

Adapts NP-F batteries to power cameras and accessories via 12 V 5.5×2.5 mm, 16.8 V D-Tap and 5 V USB outputs with LED capacity display

  • TypeAdapter
  • Pack1-Pack
  • CapacityNo Battery
  • Dimensions3*2*1 Inch
  • FeaturesWith LED Indicators
  • Power multiple devices simultaneously via 12 V 5525, 16.8 V D-Tap and 5 V USB outputs
  • Recharge the adapter itself through 5 V 2 A USB-C or 8.4 V 5521 DC input
  • Monitor remaining NP-F battery charge instantly with built-in LED indicator and switch
  • Mount securely to any camera rig using standard 1/4" thumbscrew hole and rubber pads
  • Compact 3×2×1 inch plate adds versatile power distribution without extra bulk

NP-F Adapter Plate for Extended Camera Power

The Kastar NP-F adapter plate attaches to Sony NP-F type batteries to supply additional run-time for DSLR and mirrorless cameras. It accepts power through a Type-C port at 5V 2A and a 5521 barrel connector at 8.4V 5A, then distributes it across multiple outputs for accessories and the camera itself.

Sustained Output Across Four Rails

The plate delivers 12V 2A via a 5525 barrel connector, 16.8V 2A through a D-Tap socket and 5V 3A from a USB port while the battery remains under load. An LED indicator switch shows remaining capacity so you can monitor discharge during long shoots without interrupting the session.

Quarter-Inch Mount With Rubber Grip

A 1/4" thumbscrew or screw hole secures the adapter to the camera cage or rig, and rubber pads on the underside prevent slippage on smooth surfaces. The compact 3*2*1 Inch footprint keeps the battery close to the body, reducing leverage on the mount when the rig is tilted or moved.

Highlights

  • Power multiple devices simultaneously via 12 V 5525, 16.8 V D-Tap and 5 V USB outputs
  • Recharge the adapter itself through 5 V 2 A USB-C or 8.4 V 5521 DC input
  • Monitor remaining NP-F battery charge instantly with built-in LED indicator and switch
  • Mount securely to any camera rig using standard 1/4" thumbscrew hole and rubber pads
  • Compact 3×2×1 inch plate adds versatile power distribution without extra bulk

Specifications

BrandKastar
ModelNP-F ADAPTER
Part NumberNPFADAPTER-1P
TypeAdapter
Pack1-Pack
CapacityNo Battery
Dimensions3*2*1 Inch
FeaturesWith LED Indicators

Questions about this item

Does the adapter plate generate noticeable heat or fan noise when powering a camera all day from an NP-F battery?

The plate has no fan and uses passive components; under continuous load it will warm slightly but stays silent.

What must I already own to use this adapter — does it come with an NP-F battery or a Type-C power supply?

You need your own Sony NP-F series battery and, for USB-C input charging, a 5 V 2 A USB-C charger; neither is included.

Can I run my legacy monitor that only takes a 5.5 × 2.1 mm barrel jack from this plate?

The 5.5 × 2.1 mm port is an 8.4 V input only; the plate outputs 12 V on a 5.5 × 2.5 mm jack, 16.8 V on D-Tap and 5 V on USB.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.