Kaisiking KSSF868 Solder Flux & Desoldering Wick Kit 10cc .1in 3m
A no-clean flux paste and braided desoldering wick kit for precise electronics rework and solder removal
- Compatibility/FitmentKSSF868, 1+1solder flux &desolder wick
- No-clean flux eliminates post-solder cleanup
- Rosin-based paste removes oxidation from copper traces
- 10cc syringe allows precise flux application
- 3m braided wick absorbs excess solder quickly
- .1in ultra-fine wick suits delicate SMD rework
Solder Flux & Desoldering Kit
The Kaisiking KSSF868 kit bundles 10cc of no-clean flux paste with a 3m length of .1in braided desoldering wick. It is built for technicians and hobbyists who need to remove solder cleanly from printed circuit boards. The rosin-based flux breaks down oxidation to restore solderability on pads and leads. Everything fits in a compact package for bench or field use.
Suited for precision rework and prototyping
This set works well for SMD rework, smartphone board repair, Arduino builds and vintage electronics restoration. The fine wick absorbs excess solder with minimal heat transfer to protect sensitive components. Users who need a larger flux volume or wider wick for heavy through-hole joints should look at something else. It is not intended for plumbing or sheet-metal applications.
Flux paste and wick change the workflow
The no-clean formula evaporates during heating so no post-solder cleaning step is required. The syringe allows precise dispensing on dense boards without flooding adjacent parts. The 3m spool of ultra-fine copper braid provides enough length for multiple desoldering tasks. Together they reduce residue risk and speed up repair cycles.
Highlights
- No-clean flux eliminates post-solder cleanup
- Rosin-based paste removes oxidation from copper traces
- 10cc syringe allows precise flux application
- 3m braided wick absorbs excess solder quickly
- .1in ultra-fine wick suits delicate SMD rework
Specifications
| Compatibility/Fitment | KSSF868, 1+1solder flux &desolder wick |
|---|
Questions about this item
What soldering iron do I need to activate the 10cc flux paste and .1in wick?
Any standard soldering iron that reaches normal soldering temperature will activate the flux and let the wick absorb solder.
Can I use this kit on older PCBs with oxidised copper traces?
Yes, the rosin-based flux is formulated to break down oxide layers on copper traces and leads, restoring solderability on aged boards.
How do I know the no-clean flux has evaporated properly after a joint?
After heating, the flux residue should appear dry and clear with no sticky film, indicating it has fully evaporated as intended.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
