KABCON 24W AC Adapter for Surface Go, Go 2, Go 3, Go 4, Pro 3/4/5 Core m3, Laptop Core m3
24 W AC adapter with 4.7 ft cord and travel pouch charges Surface Go 1-4 and Core m3 Pro/Laptop models
- CompatibilityTablets
- Battery Voltage5V
- Battery Capacity15 volts
- AC Adapter Voltage19V
- AC Adapter Current1.6 amps
- AC Adapter Output Power24W
- Charges Surface Go 1–4 and Core m3 Pro/Laptop models
- 24 W output at 15 V 1.6 A for fast recharging
- Built-in protection against over-current, short-circuit, over-voltage and overheating
- Compact 2.56×1.78×1.14 in brick with 4.7 ft DC cord
- Includes travel pouch for portable use
Travel-Ready 24W Adapter
The KABCON 24W AC adapter supplies 15 volts at 1.6 amps for Surface Go models one through four, Surface Pro 3, 4 and 2017 Core m3 units, and Surface Laptop Core m3 devices. A 4.7 ft DC cord and a storage pouch make it a compact companion for mobile work.
Intelligent Protection Circuitry
Built-in safeguards monitor current, voltage, temperature and short-circuit conditions while the unit operates on 100–240 volt mains at 50 or 60 Hz. The adapter runs within expected thermal limits during normal charging cycles.
Simple Plug-In Integration
The two-pin input requires no ground connection and the barrel output mates directly with the listed Surface models. No extra cables or converters are needed, freeing bag space for other essentials.
Highlights
- Charges Surface Go 1–4 and Core m3 Pro/Laptop models
- 24 W output at 15 V 1.6 A for fast recharging
- Built-in protection against over-current, short-circuit, over-voltage and overheating
- Compact 2.56×1.78×1.14 in brick with 4.7 ft DC cord
- Includes travel pouch for portable use
Specifications
| Brand | KABCON |
|---|---|
| Model | EADP-1735 24W |
| Part Number | EADP-1735 24W |
| Compatibility | Tablets |
| Battery Voltage | 5V |
| Battery Capacity | 15 volts |
| AC Adapter Voltage | 19V |
| AC Adapter Current | 1.6 amps |
| AC Adapter Output Power | 24W |
| Features | Travel, 2-Pin, Corded Electric, 1, type_a_2pin_na, 15 volts, 1.6 amps |
| Weight | 0.4 pounds |
Questions about this item
How do I connect the 4.7Ft DC cord to my Surface Go 3, and what is the step people often miss?
Plug the barrel connector firmly into the Surface charging port until it clicks; the step often missed is verifying the LED on the connector lights up, confirming the 15V 1.6A handshake.
What part of this 24W adapter will need replacement first with daily travel use?
The 4.7Ft DC cord and its strain relief near the barrel connector wear first; the 3.68-ounce brick itself has no moving parts and the travel pouch reduces cable fatigue.
At what sustained load does the 15V 1.6A output hit its thermal limit?
Continuous 24W draw (15V at 1.6A) will raise the brick temperature; the built-in temperature control throttles output if the case exceeds its safe operating threshold.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



