K Tool International
K-Tool International KTI-39130 3/4" Drive 30mm Metric Socket tool storage
A 3/4 inch drive metric impact socket fits 30mm fasteners for heavy-duty applications
- 3/4" drive handles high-torque impact work
- 30 mm metric size fits large fasteners
- 6-point design grips flats to prevent rounding
- Short length reaches tight clearance areas
- Impact-grade steel withstands repeated heavy blows
3/4" Drive 30 mm Metric Socket
The K-Tool International KTI-39130 is a 3/4 inch drive metric impact socket sized at 30 mm with a six-point configuration. It is built for technicians who need a single heavy-duty socket for large fastener work on commercial or industrial equipment. The short profile allows access in confined areas where longer sockets cannot reach. This tool suits professional garages and fleet maintenance departments.
Impact Duty Construction
The socket is manufactured for impact use, meaning it absorbs the repeated hammer blows of a pneumatic or electric impact wrench without cracking. Its six-point geometry grips the flat sides of a fastener rather than the corners, reducing rounding when high torque is applied continuously. The thick wall cross-section distributes stress evenly during sustained tightening or loosening cycles. Heat-treated alloy steel maintains hardness through extended service intervals.
3/4 Inch Drive Compatibility
The 3/4 inch square drive limits the socket to ratchets, breaker bars and impact guns that accept that drive size. It will not fit 1/2 inch or 1 inch drive tools without an adapter, which adds length and reduces access. The 30 mm metric opening matches only fasteners of that exact nominal size across compatible thread standards. Users must verify both the drive and the fastener dimensions before purchase.
Highlights
- 3/4" drive handles high-torque impact work
- 30 mm metric size fits large fasteners
- 6-point design grips flats to prevent rounding
- Short length reaches tight clearance areas
- Impact-grade steel withstands repeated heavy blows
Specifications
| Brand | K-TOOL INTERNATIONAL |
|---|
Questions about this item
How much heat does the 30 mm impact socket generate during all-day use?
The 30 mm impact socket is a passive steel tool; it does not generate heat on its own. Heat comes from the impact gun and the fastener, not the socket.
What drive tool do I already need to run the 3/4" drive socket?
You need a 3/4" drive impact wrench or breaker bar; the socket will not fit 1/2" or 1" drives without an adapter.
Will the 30 mm socket work on the older 3/4" drive tools I already own?
Yes, any standard 3/4" square-drive tool — impact or manual — will engage the socket because the drive size matches.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
