We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five pairs of JST-XH 2.54mm 2-pin connectors with 10cm 22AWG silicone wires

JST-XH 2.54mm 2 Pin Balance Plug Male Female Connector 10cm 22AWG Silicone Wire 5 Pairs

SKU CH-QV98-SZGDG

Set of five JST-XH 2.54 mm male and female plugs with 10 cm 22 AWG silicone wire for balance charging and low-voltage projects

  • Standards/CertificationsUL Listed
  • Ready for DIY projects with UL Listed safety
  • 22AWG silicone wire handles sufficient current
  • 10cm leads fit tight build spaces
  • 54mm JST-XH plugs match 1S balance ports
  • Five male, five female, five sockets included

Product and Purpose

This set provides five pairs of JST-XH 2.54mm balance plug connectors with 10cm 22AWG silicone wire leads. It is intended for hobbyists wiring 1S lithium battery packs, Woodland Scenics Just Plug lighting, or 3D printer connections.

Who It Suits and Who It Does Not

The kit suits builders who need ready-made male and female leads plus matching sockets for quick assembly. It is not for projects requiring a different pitch, higher pin counts, longer cable runs, or heavier gauge conductors than the supplied 22AWG wire.

Compatibility Checklist

Verify that your device uses a JST-XH 2.54mm 2-pin interface and that 10cm leads reach between components. Confirm the 22AWG silicone wire can handle the expected current and that the UL Listed rating meets any project safety requirements.

Highlights

  • Ready for DIY projects with UL Listed safety
  • 22AWG silicone wire handles sufficient current
  • 10cm leads fit tight build spaces
  • 54mm JST-XH plugs match 1S balance ports
  • Five male, five female, five sockets included

Specifications

Standards/CertificationsUL Listed

Questions about this item

Do I need a separate 1S lithium cell and a balance charger with a JST-XH port to use these connectors?

Yes, the leads are designed as 1S balance-charge lines ending in JST-XH plugs, so you must supply the cell and a charger that accepts that connector.

Can the 2.54 mm pitch JST-XH sockets mate with older JST-XH equipment I already own?

The sockets follow the standard 2.54 mm JST-XH pitch, so they will connect to any existing JST-XH headers or plugs using the same spacing.

How can I confirm the silicone wire is intact and the polarity is correct after wiring?

Check continuity on each 22 AWG lead with a multimeter and verify the red wire aligns with the positive pin on both male and female ends.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.