Cable Techniques
Cable Techniques Smart Battery Adapter Cap to Hirose 4-Pin 24
$52.99
0.00063536BTC
In stock
JOYO JMH-02 Studio Monitor Headphones 50mm 32 ohm Gray
Over-ear studio headphones with 50 mm drivers, flat response and passive isolation for recording and mixing
- TypeOver the Ear
- ColorGray
- Driver Unit50 millimeters
- Frequency Response25000 hertz
- THDOver Ear
- Input Impedance32 ohms
- Flat, accurate monitoring sound from 50mm neodymium drivers
- Passive noise isolation via closed-back over-ear design seals out room noise
- 3 metre cable with 3.5mm and 6.35mm adapters fits any device
- Adjustable leather headband and soft earcups stay comfortable for long sessions
- Lightweight 300 gram build suits studio, stage and portable use
Studio Monitor Headphones 50mm Drivers
The JOYO JMH-02 is a pair of wired over-ear headphones built for studio monitoring. Large 50mm neodymium drivers deliver a flat frequency response from 20Hz to 20kHz without artificial bass boost. A closed-back design provides passive noise isolation for tracking and focused listening. The 3m detachable cable includes both 3.5mm and 6.35mm connectors.
Upgrade from Consumer Headphones
Consumer headphones often colour the sound with boosted lows or bright highs that mask mix issues. The JMH-02 removes that coloration so engineers hear the actual balance of a recording. The jump is worth it when you need accurate translation to speakers or must prevent headphone bleed into live microphones during tracking sessions.
Suits Home Studios and Mobile Recording
Musicians, podcasters and beginner engineers who need a single headphone for tracking, mixing and instrument practice will benefit from the flat response and dual adapters. Buyers who want wireless freedom or active noise cancellation for commuting should look elsewhere. The fixed cable and passive isolation only design does not support those use cases.
Highlights
- Flat, accurate monitoring sound from 50mm neodymium drivers
- Passive noise isolation via closed-back over-ear design seals out room noise
- 3 metre cable with 3.5mm and 6.35mm adapters fits any device
- Adjustable leather headband and soft earcups stay comfortable for long sessions
- Lightweight 300 gram build suits studio, stage and portable use
Specifications
| Brand | JOYO |
|---|---|
| Series | 2 |
| Model | JOYO Studio Monitor Headset, JOYO-JMH02, 210-JMH02-0011 |
| Part Number | 210-JMH02-0011 |
| Type | Over the Ear |
| Color | Gray |
| Driver Unit | 50 millimeters |
| Frequency Response | 25000 hertz |
| THD | Over Ear |
| Input Impedance | 32 ohms |
| Power Supply | false |
| Connector | 3.5mm |
| Ear Coupling | over_ear |
| Cord Length | 3.5mm Adapter |
| Weight | 300 grams |
| Noise Cancelling | Passive |
| Wireless Type | Bluetooth |
| Microphone Impedance | ~3K ohm |
| Microphone Frequency Response | 25000 hertz |
| Features | passive_noise_cancellation, Detachable, Media Control, touch, Wired, Over Ear, dynamic_driver, 32 ohm, Headphone |
| Package Contents | Headphone, 6.35mm Adapter, 3.5mm Adapter, User Manual |
Questions about this item
How much space does the 3-meter cable and 6.35mm adapter need on my desk or in my bag?
The straight cable runs three metres and the screw-on 6.35mm adapter adds roughly two centimetres, so allow a little extra length when routing it beside an interface or amp.
Which jack do I plug in first — the 3.5mm plug or the 6.35mm adapter — and which way round does the adapter thread?
Insert the 3.5mm plug into the source, then screw the 6.35mm adapter clockwise onto that plug until it seats firmly; reversing the order leaves the adapter loose.
When should I replace the ear pads on these 50mm driver headphones?
Swap the pads once the leatherette surface cracks or the foam no longer springs back, typically after several hundred hours of daily studio use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
HQRP
HQRP 2-Pack 10 ft 2.1mm x 5.5mm DC Power Extension Cable + Coaster
- Black
$4.99
0.00005983BTC
In stock