Jonard
Jonard MOS-1416 IC Insertion Tool 14-16 Pin
Inserts and extracts 14- to 16-pin ICs with .3 in pitch using a lightweight plastic body and ground lug
- TypeConnector Tools
- MaterialHAWA
- Weight0.06
- Handles 14 to 16 pin ICs with .3 in pitch for precise insertion
- Ground lug protects sensitive components from static damage during handling
- Lightweight .06 lb plastic body reduces fatigue during repetitive assembly tasks
- Jonard MOS-1416 model purpose-built for 1416 series connector work
- California Prop 65 warning discloses regulated chemical content for safety awareness
IC Insertion Tool 14-16 Pin
The Jonard MOS-1416 is a hand tool designed for inserting integrated circuits with 14 to 16 pins. It suits technicians and hobbyists who work with dual in-line packages on breadboards or through-hole printed circuit boards. The tool aligns pins during insertion to prevent bending or damage. It is not for surface-mount components or pin counts outside the stated range.
Capacity and headroom 14 to 16 pins
The tool accommodates ICs from 14 pins up to 16 pins with a .3 in pitch between pins. It handles standard logic and memory packages within that window comfortably. Larger pin counts or finer pitches fall outside its capability. The ground lug provides a path for static discharge during handling.
Thermals noise and power draw
No thermals, noise or power draw apply because the tool is a passive plastic implement with no electrical or moving parts. The .06 weight keeps operator fatigue low during repetitive use. There are no fans, motors or active cooling to consider. California Proposition 65 warnings note the presence of listed chemicals.
Highlights
- Handles 14 to 16 pin ICs with .3 in pitch for precise insertion
- Ground lug protects sensitive components from static damage during handling
- Lightweight .06 lb plastic body reduces fatigue during repetitive assembly tasks
- Jonard MOS-1416 model purpose-built for 1416 series connector work
- California Prop 65 warning discloses regulated chemical content for safety awareness
Specifications
| Brand | Jonard |
|---|---|
| Type | Connector Tools |
| Material | HAWA |
| Weight | 0.06 |
Questions about this item
Will the 0.3 in pitch on this MOS-1416 match the DIP sockets I already use?
Yes, the tool is built for 14 to 16 pin ICs with a 0.3 in pitch, so it fits standard DIP-14 and DIP-16 sockets.
How can I verify the ground lug is making contact after I insert an IC?
After insertion, use a multimeter to check continuity between the IC’s ground pin and the tool’s ground lug; a low-resistance reading confirms contact.
Does the MOS-1416 come with an extraction attachment or do I buy that separately?
The box contains only the plastic insertion tool with its integrated ground lug; a separate extraction tool is not included.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
