Jonard
Jonard JIC-175 6 in Fiber Optic Cable Stripper 250 to 125 Micron
Strips fiber optic cable from 250 to 125 micron with ground, hardened blades and a standard cushion grip
- TypeKnives, Cutters & Snips
- Strips fiber cables from 250 down to 125 micron
- Ground and hardened blades deliver clean, repeatable cuts
- Standard cushion grip reduces hand fatigue during long runs
- Works on solid wire up to .5 in and cable 16 in
- Yellow plastic body makes the tool easy to spot on site
Jonard JIC-175 Fiber Optic Stripper
The Jonard JIC-175 is a 6 in hand tool designed to strip fiber optic cable. It suits technicians who prepare cables for termination or splicing in field or bench environments. The tool handles solid wire up to .5 in and cable diameters from 3/16 to 1/2 in. Its yellow plastic grips provide a standard cushion hold during repetitive stripping tasks.
Stripping range 250 to 125 Micron
The cutting capacities cover 250 to 125 Micron, matching common coating and cladding dimensions for standard fiber preparation. Blades are ground and hardened to maintain a consistent edge through repeated use. The stripper has no adjustment mechanism, so the range is fixed by the factory profile. It stops being effective when cable diameters fall outside the stated 3/16 to 1/2 in window.
Non-insulated fixed-profile design
The body and grip are plastic with no insulated rating, so the tool is not intended for live electrical work. There is no adjustment mechanism to fine-tune the blade depth for non-standard coatings. Buyers who need variable stripping depths or insulated handles for voltage exposure should select a different tool.
Highlights
- Strips fiber cables from 250 down to 125 micron
- Ground and hardened blades deliver clean, repeatable cuts
- Standard cushion grip reduces hand fatigue during long runs
- Works on solid wire up to .5 in and cable 16 in
- Yellow plastic body makes the tool easy to spot on site
Specifications
| Brand | Jonard |
|---|---|
| Type | Knives, Cutters & Snips |
Questions about this item
Will the JIC-175 strip the 250 micron coating off my existing patch cords?
Yes, the cutting capacities cover 250 to 125 micron so it removes the standard coating on those cords.
How do I know the JIC-175 blades are sharp enough after a few uses?
The blades are ground and hardened; a clean cut with no nicks on the 125 micron fibre shows they are working.
Does the JIC-175 come with spare blades or a hex key for adjustments?
The stripper has no adjustment mechanism and no spare blades are included; only the yellow plastic-handled tool itself is supplied.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
