We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass inline ball valve with aluminum tee handle

Jomar Valve

Jomar Valve 102-303 Brass 2-Port Ball Valve 1/2 in FNPT x FNPT 600 psi CWP -40 to 450 Degrees F

SKU CH-HFX8-7AT7P

Brass 2-port ball valve with 1/2 in FNPT connections, 600 psi CWP rating, and -40 to 450 °F temperature range

  • MaterialHAWA
  • Reliable shut-off for gas lines with 600 psi CWP rating
  • Withstands extreme cold down to -40 Degrees F
  • Handles high heat up to 450 Degrees F
  • Blowout-proof stem prevents accidental stem ejection
  • PTFE seats and FPM seals ensure chemical resistance

Brass Two-Port Ball Valve

The Jomar Valve 102-303 is a brass inline ball valve designed for gas and fluid control in plumbing and HVAC systems. It suits installers who need a standard-port shut-off with a 1/2 inch FNPT thread on each end.

Two-Piece Brass Body with Blowout-Proof Stem

The valve uses a two-piece brass body sealed with FPM and PTFE seats rated for 600 psi CWP. A blowout-proof brass stem and aluminum tee handle allow quarter-turn operation without stem ejection risk.

Temperature Range -40 to 450 Degrees F

The assembly handles continuous service from -40 to 450 degrees F, making it suitable for hot-water heating and cold-climate gas lines. It carries no steam rating, so it must not be used on steam circuits.

Highlights

  • Reliable shut-off for gas lines with 600 psi CWP rating
  • Withstands extreme cold down to -40 Degrees F
  • Handles high heat up to 450 Degrees F
  • Blowout-proof stem prevents accidental stem ejection
  • PTFE seats and FPM seals ensure chemical resistance

Specifications

BrandJomar Valve
MaterialHAWA

Questions about this item

What does the 600 psi CWP rating on this Jomar 102-303 valve mean for water, oil or gas lines?

It certifies a maximum cold working pressure of 600 psi for non-shock liquid or gas service; steam service is not rated.

What pipe threads are required to connect the 1/2 inch FNPT ends on this brass ball valve?

Each port accepts a 1/2 inch male NPT thread; apply PTFE tape or pipe dope on the male threads only.

How is the blowout-proof stem on this 102-303 valve installed, and what common error should be avoided?

The stem is assembled from inside the body and retained by the packing nut; do not remove the packing nut while the line is under pressure.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.