Johnson Level & Tool
Johnson Level & Tool Proline Bilge Pump 500 GPH 22502
Moves up to 630 GPH straight or 525 GPH at 3-foot head using 2.5 amps at 13.6 volts
- Moves 500 GPH at open flow for fast water removal
- Delivers 525 GPH at 3 ft head to overcome lift
- Draws only 2.5 A so battery lasts longer
- Uses 3/4 in hose connection for simple install
Proline Bilge Pump 500 GPH
The Johnson Pump Proline bilge pump delivers a rated 500 GPH capacity with DuraPorts for reliable water removal. At 13.6 volts it moves 33 litres per minute against a 3-foot head and 40 litres per minute in a straight run. The unit draws 2.5 amps and requires a 5-amp fuse with a 3/4-inch hose connection.
Boaters needing automatic bilge drainage
This pump suits small to mid-size craft that need continuous dewatering at the stated flow rates. It is not for vessels requiring higher capacity than 630 GPH straight output or installations that cannot accommodate a 3/4-inch discharge fitting. Builders needing integrated float-switch automation should look at a different model.
Highlights
- Moves 500 GPH at open flow for fast water removal
- Delivers 525 GPH at 3 ft head to overcome lift
- Draws only 2.5 A so battery lasts longer
- Uses 3/4 in hose connection for simple install
Specifications
| Brand | Johnson Pump |
|---|
Questions about this item
What fuse size is required for the 2.5 A draw of this Proline 22502 pump?
The manufacturer specifies a 5 A fuse to protect the circuit feeding this 2.5 A bilge pump.
Will the 3/4" outlet on this 500 GPH pump connect to my existing 3/4" bilge hose?
Yes, the pump outlet is a 3/4" connection, matching standard 3/4" bilge hose for a direct fit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Tour Edge Golf Mfg. Inc.
Tour Edge Golf Mfg. Inc. pdprsu0138 golf accessory
- Toys and Games
$58.99
0.00070681BTC
In stock