Johnson Controls Inc
Johnson Controls A-4000-605 Pneumatic Oil Filter 40 scfm 150 psi 125 Deg F 0.025 micron 99.99%
A coalescing pneumatic oil filter rated at 0.025 micron removes oil aerosols from compressed air with 99.99 percent efficiency at up to 40 scfm and 150 psi
- Removes oil aerosols down to 0.025 micron
- 99 % coalescing efficiency protects downstream equipment
- Rated for 40 scfm maximum flow rate
- Withstands 150 psi operating pressure
- Operates up to 125 Deg F fluid temperature
Pneumatic Coalescing Oil Filter
This Johnson Controls A-4000-605 filter removes oil aerosols from compressed air lines using a coalescing element rated at 0.025 micron with 99.99 percent efficiency. It suits workshops and light industrial plants that need clean air for pneumatic tools or paint systems.
Threaded Port Installation
The housing mounts inline with standard pipe threads so fitment takes minutes with basic wrenches. The most common issue is cross-threading the aluminium body or forgetting to depressurise the line before breaking the connection.
Flow And Pressure Check
Verify your compressor delivers no more than 40 scfm and that the system pressure stays at or below 150 psi. Ambient temperature must not exceed 125 degrees Fahrenheit or the element seal can degrade.
Highlights
- Removes oil aerosols down to 0.025 micron
- 99 % coalescing efficiency protects downstream equipment
- Rated for 40 scfm maximum flow rate
- Withstands 150 psi operating pressure
- Operates up to 125 Deg F fluid temperature
Specifications
| Brand | JOHNSON CONTROLS |
|---|
Questions about this item
How do I confirm the Johnson Controls A-4000-605 filter is performing correctly after installation?
Monitor the system pressure drop across the housing; a stable reading below 150 psi with 40 scfm flow indicates the coalescing element is removing oil to its 99.99 percent efficiency rating at 0.025 micron.
What comes with the A-4000-605 and what must I supply separately?
The box contains the pneumatic oil filter housing and the installed coalescing element rated for 125 Deg F; you must provide the compressed-air piping, fittings and a mounting bracket.
Which A-4000 series model should I choose for a 40 scfm oil-removal application?
Select the A-4000-605 when your line runs at 150 psi maximum and 40 scfm flow, because its 0.025 micron coalescing media delivers 99.99 percent oil removal at 125 Deg F.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
