JinTaoRui
JinTaoRui 4-Channel Time Relay DC6-40V 99 Steps LCD Programmable electrician tool
A four-channel programmable time relay with LCD display, adjustable timing from .1 second to 9999 minutes, 99 steps, and 10 A contact rating for DC 6-40 V supply
- Four-channel relay with 99 programmable steps
- Timing adjustable from 0.1 seconds to 9999 minutes
- 10 A contact rating at 277 V AC or 30 V DC
- LCD display with four-key operation and reset function
- Reverse power protection prevents surge damage
Four-Channel Programmable Time Relay
The JinTaoRui module provides four independent relay channels with common, normally open and normally closed contacts. Each channel can be programmed across 99 steps with a timing range from 0.1 second to 9999 minutes. The unit operates on a DC6-40V supply and handles contact loads up to 10A at 277V AC or 30V DC.
Suited for multi-stage automation
Installers who need sequenced or looped timing across four circuits will benefit from the 99-step memory and nesting capability. Buyers requiring only a single-channel timer or simpler on-delay function should consider a less complex device.
Stable operation across wide temperature range
The relay is rated for continuous use from -40 to 85°C with a microcontroller designed for low power consumption and high reliability. Reverse power protection guards against surge current during extended duty cycles.
Highlights
- Four-channel relay with 99 programmable steps
- Timing adjustable from 0.1 seconds to 9999 minutes
- 10 A contact rating at 277 V AC or 30 V DC
- LCD display with four-key operation and reset function
- Reverse power protection prevents surge damage
Specifications
No published specifications for this item yet.
Questions about this item
What power supply do I need to run this 4-channel time relay?
A DC source between 6 V and 40 V is required to power the module.
Will the relay contacts handle the 277 V AC rating shown in the specifications?
Each channel provides common, normally open and normally closed contacts rated for 10 A at 277 V AC or 10 A at 30 V DC.
How can I confirm the programmed steps are executing correctly after wiring the module?
The industrial LCD shows the active step, remaining time and loop count in real time so you can verify operation visually.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
