We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular rear-view-mirror phone mount with adjustable clamp and telescopic arm

JDHDL RMH-07 Rear View Mirror Phone Mount 7.0 in x 3.0 in x 13.0 in Black

SKU CH-WNQ7-FPQ27

Adjustable rear-view mirror mount holds 4-7 inch phones, rotates 180 degrees, telescopes 2.2 inches and fits 98% of cars

  • TypeRear View Mirror
  • ColorBlack
  • Compatible Phone ManufacturerAll Smartphones between 4-7 inches
  • Compatible Phone ModelAll Smartphones between 4-7 inches
  • Specifications7.0 in x 3.0 in x 13.0 in
  • FeaturesAdjustable
  • Fits 98% of cars with adjustable mirror clamp 2.2-3.4 in height
  • Holds phones 4-7 inches wide with case-friendly adjustable grip
  • Extends 5.5 in arm telescopes 2.2 in for optimal reach
  • Rotates 180 degrees for flexible portrait or landscape viewing
  • Built from ABS and polycarbonate supports up to 15 pounds

Mounting Type and Compatibility

The JDHDL RMH-07 attaches to a rear-view mirror and holds any smartphone between 4 and 7 inches. Adjustable clamps fit mirrors 2.2 to 3.4 inches high and 0.9 to 2.2 inches thick, covering 98 percent of vehicles when the gap to the windshield exceeds 1.2 inches. It is not suited for mirrors outside those dimensions or for devices larger than 7 inches.

Adjustability and Stability

Four slider clamps distribute stress evenly across the mirror frame, and the fixed slider is upgraded to resist vibration on rough roads. The arm telescopes 2.2 inches and rotates 180 degrees, while the phone clamp width and bottom dock adjust for a secure, one-handed grip. No active cooling or power draw is involved.

Sustained Use Behaviour

The ABS and polycarbonate construction is water-resistant and rated for a maximum load of 15 pounds, well above the weight of any compatible phone. Under continuous driving vibration the four-clamp design maintains alignment without loosening, and the retractable dock prevents the phone from shifting during sudden stops.

Highlights

  • Fits 98% of cars with adjustable mirror clamp 2.2-3.4 in height
  • Holds phones 4-7 inches wide with case-friendly adjustable grip
  • Extends 5.5 in arm telescopes 2.2 in for optimal reach
  • Rotates 180 degrees for flexible portrait or landscape viewing
  • Built from ABS and polycarbonate supports up to 15 pounds

Specifications

BrandJDHDL
ModelRMH-07
TypeRear View Mirror
ColorBlack
Compatible Phone ManufacturerAll Smartphones between 4-7 inches
Compatible Phone ModelAll Smartphones between 4-7 inches
Specifications7.0 in x 3.0 in x 13.0 in
FeaturesAdjustable

Questions about this item

How do I clamp the mount to my rear-view mirror, and what clearance mistake causes a loose fit?

Slide the four adjustable slider clamps onto a mirror 2.2–3.4 in tall and 0.9–2.2 in thick, then tighten each slider evenly; the mount needs at least 1.2 in of clear space between mirror and windscreen or the arm cannot extend.

Which parts will wear out first and need replacement?

The ABS and polycarbonate slider clamps, the telescoping rod joints and the one-touch phone clamp spring are the moving components that see repeated stress; the supplier backs the unit with a two-year warranty.

At what point does the arm stop extending or the phone start sagging during a long drive?

The connecting rod telescopes a maximum of 2.2 in and the arm reaches 5.5 in total; combined with the 15 lb weight limit, this is the mechanical limit before the phone can no longer be positioned securely.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.